Fan

[SD1too]

Originally Posted by Frank Beuningen holland

Can i measure something on the box? To sort it out?

Yes Frank.

1. Place the red probe of your DC voltmeter on the thin blue wire and the black probe on the battery negative post.
2. With the ignition on, do you see 12 v?
3. With the engine running and the windscreen demist button pressed do you see 0v?

Simon

[Frank Beuningen holland]

Il try tomorrow simon
I think it is possible that a wire on airco compressor is not ore not well connected lot of things done there with belt change...
Thanks for sofar

Frank

[SD1too]

Originally Posted by Frank Beuningen holland

All other 0 volt
Wich means the coil of relais gets no power.....
Fuse?

With the engine running do you have 12v on the yellow wire in the control box?
This is fed from fuse 4 (15 amps) in the engine compartment fuse box.

Simon

[Frank Beuningen holland]

Hi simon
Yellow wire no power
I made a bypas wirh a fuse.... Working now
Airco needs testing
Thanks sofar

[SD1too]

Originally Posted by Frank Beuningen holland

Yellow wire no power
I made a bypas wirh a fuse.... Working now

It's best to find out the cause. Was fuse 4 intact?

Simon

[Frank Beuningen holland]

Yes fuse 4 was ok
But most important it works
Thanks for helping
First i go order condenser this one is britle
Don't want to fill airco2x
Grts from holland
Frank Koper

[SD1too]

Originally Posted by Frank Beuningen holland

But most important it works
Thanks for helping

I'm glad to be of assistance Frank.

Simon

[SD1too]

Originally Posted by Frank Beuningen holland

But most important it works
Thanks for helping

I'm glad to be of assistance Franc.

Simon