INPA cable for toaf?

Jackstevens98 · 28th September 2018, 20:33

I want to use toaf to change some settings on my 75. I have no welding or joining cable skills so apparently a INPA cable from eBay will work out of the box with toaf is this correct?

T-Cut · 28th September 2018, 21:41

A link might be useful.

TC

ceedy · 28th September 2018, 23:06

These work .... you will need to blob solder across pins 7 & 8

https://www.ebay.co.uk/p/USB-409-1-O...-UK/1571379170

anddyy · 28th September 2018, 23:10

Yes the bmw inpa cable will work without joining pins straight out the box with toaf

If you get the KKL lead then you will need to get the soldering iron out and join the pins as said above.

AndyN01 · 29th September 2018, 08:05

Hi,

I bought this one last year:
https://www.ebay.co.uk/itm/BMW-KKL-U...8AAOSwHaBWkgj6

It's a few £££'s more than some but it's just plug & play. No soldering or anything. Looks & feels like a decent quality item.

Good luck.

Andy.

28th September 2018, 20:33	#1
Jackstevens98 Loves to post Rover 75 Join Date: May 2017 Location: Sussex Posts: 354 Thanks: 41 Thanked 50 Times in 35 Posts	INPA cable for toaf? I want to use toaf to change some settings on my 75. I have no welding or joining cable skills so apparently a INPA cable from eBay will work out of the box with toaf is this correct?

28th September 2018, 23:06	#3
ceedy This is my second home All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006 Location: Nr Sherborne But in Somerset.. Posts: 6,076 Thanks: 916 Thanked 1,214 Times in 768 Posts	These work .... you will need to blob solder across pins 7 & 8 https://www.ebay.co.uk/p/USB-409-1-O...-UK/1571379170 __________________ The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's

28th September 2018, 21:41	#2
T-Cut This is my second home Rover75 and Mreg Corsa. Join Date: Nov 2006 Location: Sumweer onat mote o'dust (Sagin) Posts: 21,753 Thanks: 341 Thanked 3,660 Times in 2,924 Posts	A link might be useful. TC

28th September 2018, 23:10	#4
anddyy Avid contributor mg zt 180+ Join Date: May 2015 Location: blackpool Posts: 182 Thanks: 15 Thanked 38 Times in 34 Posts	Yes the bmw inpa cable will work without joining pins straight out the box with toaf If you get the KKL lead then you will need to get the soldering iron out and join the pins as said above.

29th September 2018, 08:05	#5
AndyN01 This is my second home Toyota RAV4 Join Date: Jun 2017 Location: Tamworth Posts: 3,076 Thanks: 2,478 Thanked 1,579 Times in 968 Posts	Hi, I bought this one last year: https://www.ebay.co.uk/itm/BMW-KKL-U...8AAOSwHaBWkgj6 It's a few £££'s more than some but it's just plug & play. No soldering or anything. Looks & feels like a decent quality item. Good luck. Andy.