|
||
|
5th February 2012, 17:37 | #1 |
This is my second home
Rover 75 V6 saloon (gone to the Rover garage in the sky), Mazda mx5 Phoenix. Join Date: Feb 2011
Location: Cumnock
Posts: 3,215
Thanks: 347
Thanked 157 Times in 92 Posts
|
How to remove the base of the back seat's Saloon. Some help please.
Yeah anyone know the easyest way to remove the base of the back seat's in the 75 Saloon. Any help would be super thanks..
|
5th February 2012, 17:56 | #2 |
Moderator / RS North East
MG ZT T 180,MGF Freestyle, Jaguar XKR Convertible and XF Join Date: Jan 2008
Location: Newton Aycliffe
Posts: 6,397
Thanks: 1,329
Thanked 2,231 Times in 1,309 Posts
|
Removal of back seats
To remove the base, just lift it up with a sharp pull at the front, and it will then come of out the clips, then with a long peice of wood, just push on the back springs and it will come off.
To remove the back, the pull seat forward, and remove the side bolsters, then using a long strong screwdriver. wedge it in and pull the screwdriver towards you, and the back should pop out, need to do it on both sides, I did it recentlyy, and did not even damage the white plastic clips. Have know done it on both cars without a problem Hope this helps Stu Last edited by Fusilier; 5th February 2012 at 18:23.. |
5th February 2012, 18:21 | #3 |
This is my second home
Rover 75 V6 saloon (gone to the Rover garage in the sky), Mazda mx5 Phoenix. Join Date: Feb 2011
Location: Cumnock
Posts: 3,215
Thanks: 347
Thanked 157 Times in 92 Posts
|
Super mate thanks for the help..
|
5th February 2012, 18:29 | #4 |
This is my second home
BMW 330d Tourer, MG ZT 180 SE XPG, VW Polo 6R 1.2 TDI Bluemotion Join Date: Jul 2011
Location: York
Posts: 6,022
Thanks: 363
Thanked 574 Times in 319 Posts
|
I pull up at each end at the front, then push the rear of the seat towards the boot while pulling up. To remove it completely you'll need to remove the seat belt.
|
|
|