Wanted - Bumper / undertray turnbuckles

Raistlin · 15th August 2008, 16:04

As per subject.

Does anybody have a few spare please?

Or a part number that XPart recognises?

Thanks

Dragrad · 16th August 2008, 00:47

Bump - me too

nisfo · 16th August 2008, 00:50

As i found out following a recent MOT......Cable ties work OK if you need a quick fix....Needless to say it is hard to find an MOT test center who wont mess where they don't need to

The_Monk · 16th August 2008, 09:42

What are turnbuckles??

Raistlin · 16th August 2008, 09:46

Quote:

Originally Posted by The_Monk

What are turnbuckles??

The twisty bits used to hold the lower bumper and undertray together.

The_Monk · 16th August 2008, 10:06

My local mgr service place does them, they replaced all of mine as I had the originals drilled off and a make do solution done. Do you want the phone number for them? They should post out as they nice guys.

Jules · 16th August 2008, 10:14

They are about 2 quid each.
Garages tend to overtighten them. (only a quarter turn is required) damaging the spring receptor.

Raistlin · 16th August 2008, 13:04

Quote:

Originally Posted by The_Monk

My local mgr service place does them, they replaced all of mine as I had the originals drilled off and a make do solution done. Do you want the phone number for them? They should post out as they nice guys.

Thanks Monk but if I could just get the part number, I'm sure my local dealer could get them.

They show up in the EPC but only as part of the whole undertray assembly;y so there isn't a part number for them

The_Monk · 16th August 2008, 13:13

Quote:

Originally Posted by Raistlin

Thanks Monk but if I could just get the part number, I'm sure my local dealer could get them.

They show up in the EPC but only as part of the whole undertray assembly;y so there isn't a part number for them

Thats a bit naff! They didnt replace the whole tray when I had my fixings replaced. Theres nothing on my invoice for those so I can't help with a part number i'm afraid. Have you tried ringing the dealer and asking if they have any spare?

JohnDotCom · 16th August 2008, 14:26

Paul,

Part Numbers you require is: KZM000050 Fastener-quick release £1.76 + VAT x8 Required.
KZM100030 Washer £1.78 + VAT x8 if required.
and for Petrol engines only KZM000040 Retainer-trim x4 81p + VAT each

PDF also shown to check parts you require.

15th August 2008, 16:04	#1
Raistlin Banned 75 CDT Connoisseur SE Auto Join Date: Nov 2006 Location: Wolverhampton Posts: 8,450 Thanks: 0 Thanked 3 Times in 3 Posts	Wanted - Bumper / undertray turnbuckles As per subject. Does anybody have a few spare please? Or a part number that XPart recognises? Thanks

16th August 2008, 00:47	#2
Dragrad This is my second home *None DROWNED** Join Date: Aug 2007 Location: Cardigan Posts: 33,339 Thanks: 1,257 Thanked 1,664 Times in 1,081 Posts	Bump - me too __________________ Andrew Ich Dien Problem solving is... lateral thinking SEARCH FIRST ...ASK LATER...

16th August 2008, 10:14	#7
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	They are about 2 quid each. Garages tend to overtighten them. (only a quarter turn is required) damaging the spring receptor. __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

16th August 2008, 00:50	#3
nisfo Gets stuck in 75 Join Date: Jun 2007 Location: - Posts: 868 Thanks: 0 Thanked 2 Times in 2 Posts	As i found out following a recent MOT......Cable ties work OK if you need a quick fix....Needless to say it is hard to find an MOT test center who wont mess where they don't need to

16th August 2008, 09:42	#4
The_Monk I really should get out more....... - Join Date: Nov 2006 Location: - Posts: 2,586 Thanks: 0 Thanked 3 Times in 2 Posts	What are turnbuckles??

16th August 2008, 10:06	#6
The_Monk I really should get out more....... - Join Date: Nov 2006 Location: - Posts: 2,586 Thanks: 0 Thanked 3 Times in 2 Posts	My local mgr service place does them, they replaced all of mine as I had the originals drilled off and a make do solution done. Do you want the phone number for them? They should post out as they nice guys.