|
||
|
21st July 2022, 20:14 | #1 |
Newbie
MG ZT-T 190 Join Date: Oct 2020
Location: Pwllheli
Posts: 25
Thanks: 7
Thanked 5 Times in 4 Posts
|
Throttle sticking
So did the thermostat on the V6 keyhole method and now got a sticky throttle. Intermittently it sticks at around 1250 but sometimes higher, blipping the throttle causes it to drop back to normal. Tried TPS reset makes no difference, TB is clean but it appears it is the butterfly that is sticking as this bit isn't dropping back to rest.
Any thoughts to a fix
__________________
__________________________________________________
02 ZT-T 190 - 02 MG TF 160 - 03 MG TF - 115 - 04 MG TF 135 - 05 Discovery 3 4.4 V8 - 72 Series III 109 |
21st July 2022, 21:03 | #2 |
Newbie
MG ZT-T 190 Join Date: Oct 2020
Location: Pwllheli
Posts: 25
Thanks: 7
Thanked 5 Times in 4 Posts
|
Problem solves hard pipe routed wrongly.
__________________
__________________________________________________
02 ZT-T 190 - 02 MG TF 160 - 03 MG TF - 115 - 04 MG TF 135 - 05 Discovery 3 4.4 V8 - 72 Series III 109 |
|
|