Wishbone Help

[TourerSteve]

Originally Posted by TourerSteve

The flange and shank of the bolt will have picked up on the bush over the years as it will have been fitted dry and will have corroded . That's why the bolt will be tighter

I think you will find for the reasons above the bolt will be tighter than 150nm and will take extra force to to break out , hence the broken Torque wench .
Ideally you want a straight pull from the socket with the breaker bar but realise you may need need to add extension or swivel , but each will loose you leverage . I would go down the impact socket route first trying 18mm or 11/16 af (approx 17.5 mm) using as last resort your extractors ! You can hammer on impact sockets if you have the room