Still Knocking.

jackatesme · 30th October 2017, 14:48

As above,from front offside,just put on genuine drop link,DMGRS. new wishbone and bush 2 mths ago. But knock is still there when going over small bump. Is there anything else would need changing

stevestrat · 30th October 2017, 15:03

Your exhaust isn't loose? I had it where the exhaust had dropped a fraction, just enough to bring it into contact with the tunnel cross braces when it bounced. New rubbers cured it.

roverbarmy · 30th October 2017, 15:17

Quote:

Originally Posted by jackatesme

As above,from front offside,just put on genuine drop link,DMGRS. new wishbone and bush 2 mths ago. But knock is still there when going over small bump. Is there anything else would need changing

Check other wishbone/bush, anti roll bar bushes, strut top bearings, track rod ends (inner and outer).

Rev Jules · 30th October 2017, 15:48

My guess would be strut bearings?

Rev

30th October 2017, 14:48	#1
jackatesme This is my second home rover 75 saloon.Renault Captur 1.5 diesel. Join Date: Mar 2013 Location: rhymney Posts: 3,661 Thanks: 2,269 Thanked 1,242 Times in 702 Posts	Still Knocking. As above,from front offside,just put on genuine drop link,DMGRS. new wishbone and bush 2 mths ago. But knock is still there when going over small bump. Is there anything else would need changing __________________ - John B signing out Maralyn was born 9th Sept 2004 14.44.48. 103,597 of 112,381 (75s) 3,021 of 4,744 Connie SE 239 of 1.685 Platinum Gold. "Maralyn": Platinum Blonde,Troublesome,Unpredictable.

30th October 2017, 15:03	#2
stevestrat This is my second home ZT260 #243 (resting) Join Date: May 2010 Location: Prestonpans Posts: 22,489 Thanks: 650 Thanked 4,624 Times in 3,358 Posts	Your exhaust isn't loose? I had it where the exhaust had dropped a fraction, just enough to bring it into contact with the tunnel cross braces when it bounced. New rubbers cured it. __________________ Steve T4 Location Map

30th October 2017, 15:48	#4
Rev Jules This is my second home Rover 75 Tourer+ Join Date: Mar 2011 Location: Radcliffe on Trent Posts: 10,711 Thanks: 7,308 Thanked 3,929 Times in 2,051 Posts	My guess would be strut bearings? Rev