|
||
|
22nd April 2018, 11:16 | #1 |
This is my second home
Back in a Rover Join Date: Nov 2006
Location: Peterborough
Posts: 4,926
Thanks: 131
Thanked 357 Times in 261 Posts
|
Help needed quickly
Trying to change the driver lock actuator that would lock but did not unlock and the only way I could get the door open was to use the key.
So removed the old actuator and fitted the new one, seemed to work Ok when I pressed the the key to lock and unlock - i.e. movement in the actuator. so shut the driver door and the door pin part fell off into the car door. Tried to unlock on the key fob not working, tried to unlock on the key inserted still nothing, there is a resistance but the handle does not open the door. Not put the door card back on and the windows are down thankfully. So at the moment I can only get into the car via the passenger door which works on the key fob. Help. Last edited by STUBIE; 28th April 2018 at 13:11.. |
22nd April 2018, 11:35 | #2 |
This is my second home
Back in a Rover Join Date: Nov 2006
Location: Peterborough
Posts: 4,926
Thanks: 131
Thanked 357 Times in 261 Posts
|
Panic over - in thru the passenger side and with window up I could pull up the handle rod which unlocked the door. Look lile the rod that connects the handle to the lock was not tight enough and didn't have enought pull to open the door. Now to start again.
Moral leave doors and windows open when working on the car, you'll never know when you'll need them open. Last edited by STUBIE; 28th April 2018 at 13:15.. |
22nd April 2018, 13:54 | #3 |
This is my second home
Back in a Rover Join Date: Nov 2006
Location: Peterborough
Posts: 4,926
Thanks: 131
Thanked 357 Times in 261 Posts
|
What a pain that was, got the handle part working and then the indoor release cable came loose with the actuator fitted, had to fit it back on blind in situ.
then tried the door and still didn't work but checked the connector on the actuator which wasn't plugged in full and voila a working locking and unlocking door. I am now bent double with being on my knees for the best part of 3 hours. I am too old (and too fat) for this. Only got the 2 back doors to do now Stubs Last edited by STUBIE; 28th April 2018 at 13:14.. |
Thread Tools | |
Display Modes | |
|
|