|
||
|
3rd June 2007, 18:43 | #1 |
Avid contributor
Rover 75 CDT Join Date: Dec 2006
Location: Stokesville
Posts: 115
Thanks: 0
Thanked 0 Times in 0 Posts
|
Little signal led's
How about someone making little signal leds mounted on different plugs like the injector wiring plugs, the fan plugs, in fact anywhere there's a plug or socket. Pass through signal adapters is what I mean, you know, you put them in line, while the unit you are testing is working.
Even better, what about a clamp like idea, like a current clampmeter. Put the clamp on the wire, amplify the signal, have a pot to tune the gain, and watch as the led pulses. Could even wire the clamp up with a testpoint for a scope. Last edited by myjess; 3rd June 2007 at 18:45.. |
|
|