odd bit

PEPPER953 · 9th January 2012, 21:26

Ok i have a fairly constant supply of odd bits
(e.g) the bits you loose when carring out other jobs
Scrivets for wheel arches self tappers odd fixings etc
I am willing to help anyone with the above
IF AVAILABLE at the time of asking
please don't ask for doors bonnets or anything that
is of real value

StewartIngram · 10th January 2012, 07:31

If you can help, I'm looking for the following bits?

engine undertray fixings (screws & chassis fasteners)
front scuttle(? at base of windscreen) fixings

also the pipe clips for the breather hoses on top of the engine, similar to quickfit push in plumbing connectors, both sizes.

Car is KV6 2.5 auto.

Stewart

markvh · 10th January 2012, 08:14

Hi,

I could do with a few of the clips that secure the plenum cover, some of mine are a bit ragged where they have been levered up with something sharp...

Thanks
Mark

PS - am happy to pay!

PEPPER953 · 10th January 2012, 21:52

Quote:

Originally Posted by StewartIngram

If you can help, I'm looking for the following bits?

engine undertray fixings (screws & chassis fasteners)
front scuttle(? at base of windscreen) fixings

also the pipe clips for the breather hoses on top of the engine, similar to quickfit push in plumbing connectors, both sizes.

Car is KV6 2.5 auto.

Stewart

Hi Stewart
That would be the RED push part?
scuttle panel fasteners i have

PEPPER953 · 10th January 2012, 21:56

Quote:

Originally Posted by markvh

Hi,

I could do with a few of the clips that secure the plenum cover, some of mine are a bit ragged where they have been levered up with something sharp...

Thanks
Mark

PS - am happy to pay!

Hi Mark
How many do you NEED as above post will Req
a couple.
F.O.C p.m your Address

HarryM1BYT · 10th January 2012, 22:16

Unlikely request, but I'm looking for a length of the semi rigid small fuel pipe which feeds the FBH. I need about four or five feet, to enable me to get from the pump at the rear, to a small tank I'm looking to add in the boot area for red diesel.

Dragrad · 11th January 2012, 00:49

Guys 'n' gals... please note that the OP is doing this FOC.

But please, also be aware that although he is not charging for the bits that he can provide, it would only be fair to point out that postage and courier charges of the parts are costing him. So if he asks for carriage costs, so long as they are reasonable, it is perfectly acceptable on this forum.

This applies to all, except when collected in person

StewartIngram · 11th January 2012, 09:05

yes though I have seen them in black too

Stewart

connyv6 · 11th January 2012, 09:36

do you have any clips to secure undertray many thanks

PEPPER953 · 11th January 2012, 21:30

Quote:

Originally Posted by HarryM1BYT

Unlikely request, but I'm looking for a length of the semi rigid small fuel pipe which feeds the FBH. I need about four or five feet, to enable me to get from the pump at the rear, to a small tank I'm looking to add in the boot area for red diesel.

Sorry my friend not at the moment

9th January 2012, 21:26	#1
PEPPER953 Avid contributor Rover75 Join Date: Jul 2011 Location: west mids Posts: 234 Thanks: 0 Thanked 0 Times in 0 Posts	odd bit Ok i have a fairly constant supply of odd bits (e.g) the bits you loose when carring out other jobs Scrivets for wheel arches self tappers odd fixings etc I am willing to help anyone with the above IF AVAILABLE at the time of asking please don't ask for doors bonnets or anything that is of real value

10th January 2012, 08:14	#3
markvh Loves to post MG ZT-T Join Date: Aug 2011 Location: Chorley Posts: 304 Thanks: 4 Thanked 2 Times in 2 Posts	Hi, I could do with a few of the clips that secure the plenum cover, some of mine are a bit ragged where they have been levered up with something sharp... Thanks Mark PS - am happy to pay! __________________ 2006 ZT-T CDTi 135 [SIGPIC][/SIGPIC]

10th January 2012, 22:16	#6
HarryM1BYT This is my second home 75 Contemporary SE Mk II 2004 Man. Sal. CDTi 135ps, FBH on red diesel, WinCE6 DD Join Date: May 2010 Location: Leeds Posts: 17,273 Thanks: 2,160 Thanked 2,061 Times in 1,586 Posts	Unlikely request, but I'm looking for a length of the semi rigid small fuel pipe which feeds the FBH. I need about four or five feet, to enable me to get from the pump at the rear, to a small tank I'm looking to add in the boot area for red diesel. __________________ Harry How To's and items I offer for free, or just to cover the cost of my expenses... http://www.the75andztclub.co.uk/foru...40#post1764540 Fix a poor handbrake; DIY ABS diagnostic unit; Loan of the spanner needed to change the CDT belts; free OBD diagnostics +MAF; Correct Bosch MAF cheap; DVB-T install in an ex-hi-line system; DD install with a HK amp; FBH servicing. I've taken a vow of poverty. To annoy me, send money.

11th January 2012, 00:49	#7
Dragrad This is my second home *None DROWNED** Join Date: Aug 2007 Location: Cardigan Posts: 33,339 Thanks: 1,257 Thanked 1,664 Times in 1,081 Posts	Guys 'n' gals... please note that the OP is doing this FOC. But please, also be aware that although he is not charging for the bits that he can provide, it would only be fair to point out that postage and courier charges of the parts are costing him. So if he asks for carriage costs, so long as they are reasonable, it is perfectly acceptable on this forum. This applies to all, except when collected in person __________________ Andrew Ich Dien Problem solving is... lateral thinking SEARCH FIRST ...ASK LATER...

10th January 2012, 07:31	#2
StewartIngram Gets stuck in Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008 Location: Chatteris, Cambridgeshire Posts: 903 Thanks: 320 Thanked 159 Times in 127 Posts	If you can help, I'm looking for the following bits? engine undertray fixings (screws & chassis fasteners) front scuttle(? at base of windscreen) fixings also the pipe clips for the breather hoses on top of the engine, similar to quickfit push in plumbing connectors, both sizes. Car is KV6 2.5 auto. Stewart

11th January 2012, 09:05	#8
StewartIngram Gets stuck in Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008 Location: Chatteris, Cambridgeshire Posts: 903 Thanks: 320 Thanked 159 Times in 127 Posts	yes though I have seen them in black too Stewart

11th January 2012, 09:36	#9
connyv6 Loves to post 75 conny Join Date: Aug 2011 Location: black country Posts: 264 Thanks: 0 Thanked 0 Times in 0 Posts	do you have any clips to secure undertray many thanks