Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 16th April 2024, 08:58   #1
billh
Regular poster
 
Rover 75 Tourer

Join Date: May 2007
Location: Denton, Manchester
Posts: 79
Thanks: 14
Thanked 24 Times in 14 Posts
Default HGF again and a question.

The HG has gone again after about 5K miles. Steam out of exhaust , coolant from header , and massive coolant consumption . Took the head off, there's indentation by the fire rings and a strange build up of crystallized(?) pink coolant in the waterways and under parts of the HG.
I have been in contact with a local MG specialist for a re-furbished head but my question is: can I use a 1.8k head and cams intended for an MG TF on the Rover 1.8 Turbo? Can I swap the cams over if they are different? Am I completely off beam with my ideas? Sorry that's three questions. Thanks.
billh is offline   Reply With Quote
Old 25th April 2024, 13:47   #2
Tim JMGRs
Avid contributor
 
MG ZT

Join Date: Jul 2018
Location: Leigh
Posts: 121
Thanks: 72
Thanked 32 Times in 29 Posts
Default

If it's "gone again" after 5000 miles, it wasn't done properly the last time!
Tim JMGRs is offline   Reply With Quote
Old 26th April 2024, 17:27   #3
xsport
Posted a thing or two
 
rover 75 club se

Join Date: Apr 2011
Location: Leicester
Posts: 1,711
Thanks: 358
Thanked 419 Times in 310 Posts
Default

People on this club who have 1.8 engines use a specific type of headgasket when repair is required. You can google on the search engine at the top.However judging by the mileage covered since the last change of gasket, you need to find someone who can do the job properly,as obviously it was not. When the head is off you will need to do a complete inspection of the head and block surfaces heights and firewall , and many other aspects. Its not just head off and replace the gasket,as you have now realised,but if you did try yourself 10/10 for effort. Try to find some one competent , there are people on here who can maybe recommend someone competent , as it needs to be done properly , otherwise you will be stripping down again ... good luck !!
xsport is offline   Reply With Quote
Old 26th April 2024, 17:41   #4
Lagetha
Loves to post
 
Lagetha's Avatar
 
Rover 75 Saloon

Join Date: Apr 2022
Location: Bolton
Posts: 318
Thanks: 180
Thanked 42 Times in 34 Posts
Default

Robert,

DIscount MG Rover Spares explain the complexity of head gasket failures. On their web site they advise which gasket type is suitable to repair certain types of failures, what other remedial work may be necessary, and any other concerns you may have. Perhaps you could email them...



Sent from my Note 16 Pro using Tapatalk
__________________
I am Kevin, the car is my Viking shield-maiden, Lagetha!

2000 Rover 75 1.8 Classic SE in Moonstone Green/Black Leather seats and Sandstone Beige Interior (purchased 10 April 2022)
2002 Rover 25 2.0 IL TurboDiesel - gone but not forgotten, you can follow Deric's adventures on YouTube at Boaty's World and Project Nigel. AllegroMan is restoring Deric now. (Owned 25/10/2022-15/05/2023)

Lagetha is offline   Reply With Quote
Old 27th April 2024, 10:53   #5
Tim JMGRs
Avid contributor
 
MG ZT

Join Date: Jul 2018
Location: Leigh
Posts: 121
Thanks: 72
Thanked 32 Times in 29 Posts
Default

Have a word with David Tomlinson at North West Rover Repairs in Atherton, M23. He does these all the time and never had one come back. To be done properly, the head needs to be pressure tested before reassembly and the type of gasket used in the rebuild will also depend on the liner heights in the block. Nine times out of ten, the Elastomer gasket is the best one to use.
Tim JMGRs is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:56.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd