|
||
|
13th June 2014, 11:21 | #21 | |
Gets stuck in
2001 Rover 75 Tourer 2.0 CDT manual Royal Blue (JFM) Join Date: Dec 2012
Location: Viljandi, Estonia
Posts: 855
Thanks: 233
Thanked 98 Times in 87 Posts
|
Quote:
I've also been meaning to complement this thread with a step-by-step guide with pictures, but have since been too busy with other things. School and water leaking into the car being the main "obstacles". We'll see who gets to do it first then But until then, just get to it and I hope your years of waiting will come to a positive end
__________________
MODS: Front fog lamps, FBH timer switch, FBH OBD, boot and arm rest power sockets, cruise control, Powerflex lower arm bushes, illuminated vanity mirrors, high-line IPK, Symphony stereo + SLE, 160 remap, Revotec fan, 12N+12S, auto-dimming rear view mirror, rain sensor, volumetric alarm sensor, PDC, powerfolds, sports leather memory seats, passenger anti-trap sensor TO DO: Tilt sensor, low coolant sensor, FBH GSM remote control, heated washer jets, front parking sensors |
|
13th June 2014, 15:50 | #22 |
Gets stuck in
ZT-T CDTi + Join Date: Nov 2006
Location: London
Posts: 561
Thanks: 7
Thanked 10 Times in 7 Posts
|
Thanks Andre! There's an incentive to get this done - and thanks for the PM
|
14th June 2014, 14:29 | #23 |
Loves to post
Honda Accord Tourer i dtec Join Date: Jul 2011
Location: Wakefield
Posts: 331
Thanks: 56
Thanked 90 Times in 75 Posts
|
Your Pictures
Hi Rob,
hope you are successful with the Cruise Retrofit. Hope you didn't mind me including a reference to your original thread with the pictures, as they were very clear and concise and helped me complete my own cruise fitting. Cheers, Pete.
__________________
[SIGPIC][/SIGPIC] How to Retrofit Diesel Cruise Control + Loom http://www.the75andztclub.co.uk/foru...87&postcount=1 How to Modify a 3 Speed Fan for CDT & V6 into a 2 Speed with a Resistor. http://www.the75andztclub.co.uk/foru...d.php?t=209920 CDT now gone to new owner, but still on forum |
15th June 2014, 21:10 | #24 |
Loves to post
75 Saloon Join Date: Feb 2007
Location: Glasgow
Posts: 327
Thanks: 8
Thanked 10 Times in 10 Posts
|
Not working!!
Hoped this would solve the no loom problem (been wanting to add cruise to my 2.0 diesel Connie). Followed the instructions (excellent work guys) and two days of work later......nothing!! Cc switch illuminated so looks good, press it and green tell tale comes on, but that's it. Tried pressing Res and Set. Nada no little orange light on IPK. Any ideas? t4. Interestingly when I put the IPK back in the brake pad low warning has come on! Checked pads/disks and sensor, all ok. Oh dear says my wife!!! Help! |
15th June 2014, 21:26 | #25 | |
Gets stuck in
2001 Rover 75 Tourer 2.0 CDT manual Royal Blue (JFM) Join Date: Dec 2012
Location: Viljandi, Estonia
Posts: 855
Thanks: 233
Thanked 98 Times in 87 Posts
|
Quote:
Did you take extra caution with the connections/soldering and made sure that every pin went where it had to go so you can rule these out? Silly to even ask (I assume you followed the wire colours and pin numbers), but did you use the correct plug for the cruise interface plug? I added a picture of the plug from a petrol variant which is a little different. Where did you splice the can-bus wires (yellows) to?
__________________
MODS: Front fog lamps, FBH timer switch, FBH OBD, boot and arm rest power sockets, cruise control, Powerflex lower arm bushes, illuminated vanity mirrors, high-line IPK, Symphony stereo + SLE, 160 remap, Revotec fan, 12N+12S, auto-dimming rear view mirror, rain sensor, volumetric alarm sensor, PDC, powerfolds, sports leather memory seats, passenger anti-trap sensor TO DO: Tilt sensor, low coolant sensor, FBH GSM remote control, heated washer jets, front parking sensors |
|
15th June 2014, 21:59 | #26 |
Loves to post
Honda Accord Tourer i dtec Join Date: Jul 2011
Location: Wakefield
Posts: 331
Thanks: 56
Thanked 90 Times in 75 Posts
|
Hi Schotten,
you say to cruise dash light does not come on, but have you tried it on the road to see if cruise works? Also you say that the brake pad warning light is on, could this be because you have connected into the wrong plug on the IPK, because the Rave Disk identifies the wrong plug on the rear of the IPK? Pete.
__________________
[SIGPIC][/SIGPIC] How to Retrofit Diesel Cruise Control + Loom http://www.the75andztclub.co.uk/foru...87&postcount=1 How to Modify a 3 Speed Fan for CDT & V6 into a 2 Speed with a Resistor. http://www.the75andztclub.co.uk/foru...d.php?t=209920 CDT now gone to new owner, but still on forum |
16th June 2014, 07:33 | #27 |
Loves to post
75 Saloon Join Date: Feb 2007
Location: Glasgow
Posts: 327
Thanks: 8
Thanked 10 Times in 10 Posts
|
A long task to check the wiring...agh! Not the greatest of solderers but the joints did look pretty secure before putting heat shrinking insulation over them. Will take the IPK out first to check the plug and cavity used. One thing I did notice when starting up the cruise light on the IPK flickered briefly before going out. The cruise interface was bought second hand and came with connector and part of the loom, I can only assume it works!!! I used the yellow/black & yellow/brown wires coiled together above and to the left of the fuse box just before they go through the bulkhead. I used fuse piggy back (?), instead of scotch locks for the connections to fuse 41 & 4, they plug in where the fuse goes, takes the original fuse and provides a 2nd fused circuit. Other than that more or less followed the instructions. I've read elsewhere the car might not recognise the cc interface straight away? Thoughts on that one or clutching at straws!!!
|
16th June 2014, 09:04 | #28 |
Gets stuck in
ZT-T CDTi + Join Date: Nov 2006
Location: London
Posts: 561
Thanks: 7
Thanked 10 Times in 7 Posts
|
No worries at all Pete - thanks for the mention and the kind words! They were posted on line to help others, and now they'll help me too!
|
16th June 2014, 09:07 | #29 | |
Gets stuck in
ZT-T CDTi + Join Date: Nov 2006
Location: London
Posts: 561
Thanks: 7
Thanked 10 Times in 7 Posts
|
Quote:
If the cruise is going to work, it seems to do so right from the outset (even if not necessarily with full functionality) Good luck! |
|
16th June 2014, 10:17 | #30 | ||
Gets stuck in
2001 Rover 75 Tourer 2.0 CDT manual Royal Blue (JFM) Join Date: Dec 2012
Location: Viljandi, Estonia
Posts: 855
Thanks: 233
Thanked 98 Times in 87 Posts
|
Quote:
Quote:
Regarding the piggy back fuses, I've never used one but the ones I've seen on pictures take a second fuse in them to provide the second circuit, rather than creating 2 circuits with the single original fuse. Since your cc master switch lights up, the F41 in passenger compartment fusebox is okay. But did you check that F4 in engine compartment fusebox which feeds the cc interface isn't blown? Seemingly, this fuse also feeds automatic transmission, air conditioning and cooling fan. I always disconnect the battery when dealing with these things just to be on the safe side (and I have no radio code or sat nav to worry about). Did you have the battery disconnected? If not, maybe doing so now would reset things. The master switch lights up even at a standstill but did you try the set/res buttons at highway speed? When did the cc light on IPK flicker? Right after starting the engine with master switch off? When turning master switch on? When at a certaing speed pressing set/res buttons? Did it happen only once or every time you start the car? Then there's always the possibility of the interface being faulty, after all it does say "handle with care" on the casing... Oh and which scotchloks did you use on the yellow/(black/brown) wires. Some are for larger diameter wires and may not give good connection. I've not seen anyone say that their cc didn't work straight away so I'm sure you'll get it to work eventually.
__________________
MODS: Front fog lamps, FBH timer switch, FBH OBD, boot and arm rest power sockets, cruise control, Powerflex lower arm bushes, illuminated vanity mirrors, high-line IPK, Symphony stereo + SLE, 160 remap, Revotec fan, 12N+12S, auto-dimming rear view mirror, rain sensor, volumetric alarm sensor, PDC, powerfolds, sports leather memory seats, passenger anti-trap sensor TO DO: Tilt sensor, low coolant sensor, FBH GSM remote control, heated washer jets, front parking sensors Last edited by andre372; 16th June 2014 at 10:19.. |
||
Thread Tools | |
Display Modes | |
|
|