|
||
|
1st January 2021, 12:10 | #1 |
Regular poster
rover 75 saloon Join Date: Aug 2020
Location: merseyside
Posts: 39
Thanks: 27
Thanked 15 Times in 8 Posts
|
exhaust question
Hi, All the best to everyone.
just a quick question, when my rover went in for the mot last month I had a quick nose under the car on the ramps and noticed that the exhaust was all in one piece, original exhaust nearly 17 yrs old but now I think its blowing somewhere, so my question is do I have to replace the full exhaust or get one in 2 pieces and join, price wise is £200 +, I know it all depends on where its blowing, but any advice is welcome, thanks John |
1st January 2021, 13:52 | #2 |
Regional Secretary
Rover 1.8T Tourer Join Date: May 2007
Location: Heathrow
Posts: 6,948
Thanks: 1,551
Thanked 2,036 Times in 1,264 Posts
|
Far better to get under it and find where it's blowing. Once found you can decide on what really needs attention. When it's too cold or dark, start tracking parts and put them on a watch list. Good luck.
|
1st January 2021, 15:28 | #3 |
This is my second home
None Join Date: Feb 2013
Location: None
Posts: 5,556
Thanks: 465
Thanked 1,161 Times in 924 Posts
|
If just a back box is needed, most exhaust centres are able to cut through the pipe and make a join.
|
1st January 2021, 17:38 | #4 |
Avid contributor
Rover 75 saloon Join Date: Sep 2017
Location: Reading
Posts: 199
Thanks: 47
Thanked 44 Times in 31 Posts
|
https://the75andztclub.co.uk/forum/s...d.php?t=308192
Have a look at the thread above £79 from ebay with 5 year warranty. Fitting cost £30 from local mobile mechanic. Very happy with it... |
1st January 2021, 19:31 | #5 |
This is my second home
MG ZT and Rover 75, Join Date: Jul 2013
Location: Wigan
Posts: 3,276
Thanks: 2,556
Thanked 2,685 Times in 1,037 Posts
|
If...
If the back box looks like pulled pork it will need replacing, if it has limited rust it can be mended, both skins can be replaced long before it looks beyond help. The way to view it is does the external rust have a larger area than the internal part, if so it's rusting from outside in, that's easily welded back to perfect. It depends on the budget and how quiet you want it to be.
|
1st January 2021, 22:11 | #6 |
Regular poster
rover 75 saloon Join Date: Aug 2020
Location: merseyside
Posts: 39
Thanks: 27
Thanked 15 Times in 8 Posts
|
thanks for the reply's lads,
JimK and Trikey..yep have seen the Klarius on euro parts £77 all in with a clamp, cant grumble with that can you... So tomorrow ile climb underneath and check where its coming from and get one ordered John. Last edited by johnnyjazz1954; 1st January 2021 at 22:14.. |
|
|