|
||
|
15th May 2017, 09:31 | #1 |
Loves to post
MG-ZT190 Join Date: Oct 2015
Location: Kopeysk Town
Posts: 413
Thanks: 144
Thanked 9 Times in 9 Posts
|
MG ZT 190 ZCS Code
Hi all.
The weather is perfect, warm. It's time to repair your car. Remake my car in the MG ZT 190. I need to rewrite the ZCS codes. Now ZCS codes Rover 75. Can't do that as there is no access to the EEprom in the ECM and there is nothing to count codes. So I turned to Phil(Phil-T4) . Wanted to buy this software for writing ZCS codes. I'll have to leave the car in this condition as it is now. Phil I will not write more, he's not responding to my request. My car [IMG] https://www.drive2.ru/r/rover/593054/ [/ IMG] Good day, everyone. With Respect Denis Last edited by DENROVER; 15th May 2017 at 09:49.. |
15th May 2017, 10:59 | #2 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
Although it's a lot easier to use Phil's toolkit to rewrite codes it's not essential, I've been altering ZCS coding far longer than almost anybody else.
It can be done the old way by taking the old ZCS codes, altering them to accommodate the change and calculate the hidden checksums. I take it you're wanting to alter the vehicle coding from Rover 75 to MG ZT190, have you fitted a 190 engine? Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
15th May 2017, 12:12 | #3 |
I really should get out more.......
MG ZT-T, Rover 75 Tourer Join Date: Mar 2011
Location: Olney
Posts: 2,969
Thanks: 245
Thanked 1,088 Times in 657 Posts
|
You dont need my toolkit, use TOAF to change the coding in the IPK and EWS, this will cause a mismatch and when you connect the T4 it will detect it and ask you to reconfigure the car.
The EMS should then be checked and the correct tune will be offered for you to update it. |
15th May 2017, 20:33 | #4 | |
Loves to post
MG-ZT190 Join Date: Oct 2015
Location: Kopeysk Town
Posts: 413
Thanks: 144
Thanked 9 Times in 9 Posts
|
Quote:
You have a lot more experience than I in computing these codes. For me it will be easier to use the program to change the ZCS codes. Yes absolutely I want to change codes from Rover 75 to MG ZT190. The engine from the MG ZT190 is already installed on my car. Installed ECU Siemens(EMS2000) and EWS3 MG ZT 190. With Respect Denis |
|
15th May 2017, 21:02 | #5 |
I really should get out more.......
P6B, L550, Imp, F56, Commando Join Date: Nov 2006
Location: Aberdeenshire
Posts: 2,886
Thanks: 352
Thanked 677 Times in 440 Posts
|
Can you read the existing ZCS codes ?
If you can post them up someone can generate the codes and the checksum for you. Then you just need to carry out the ECM or IPK shuffle with the car to get T4 to throw a wobbler and ask for the ZCS codes with checksum. |
15th May 2017, 21:10 | #6 | |
Loves to post
MG-ZT190 Join Date: Oct 2015
Location: Kopeysk Town
Posts: 413
Thanks: 144
Thanked 9 Times in 9 Posts
|
Quote:
I apologize to you. Very glad to see you here. EMS and EWS is installed on my car from the MG ZT190. IPK reconfigured. After reconfiguring the ECU using T4 had problems with the BCU and ABS ECU. In the BCU codes have not changed and stopped working wipers (DTC Wipers Stalled). I need to disable the Traction control and Cruise control as the MG ZT, this is not in the VIN code. Parking system works but T4 this system does not specify the diagnosis. I would like that the Parking system worked for MG ZT and T4 could see her when connect. The program TOAF you can trust? Will it cope with all this? That's why I asked you for a program that would change the ZCS codes and what would T4 be able to determine the new configuration of my car. With Respect Denis Last edited by DENROVER; 15th May 2017 at 21:43.. |
|
15th May 2017, 21:18 | #7 | |
Loves to post
MG-ZT190 Join Date: Oct 2015
Location: Kopeysk Town
Posts: 413
Thanks: 144
Thanked 9 Times in 9 Posts
|
Quote:
As I will be able to provide ZCS codes? To read the dumps? I do not have access to the eeprom of ecu. As after changing codes I can upload them to the ECU of the car? With Respect Denis |
|
15th May 2017, 22:21 | #8 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
As you've already changed the EWS and Siemens 2000 EMS, are you also using the IPK and LSM from your original car or from the ZT190?
The main problem will be if there are any VIN mismatches on the normally non reconfigurable ECU's of the car. (IPK, EWS, Siemens 2000 and LSM) If all those VIN numbers match, then you should be able to configure the other ecu's on T4 without any problem, otherwise it won't What ZCS codes have you got on the readable ecu's on T4 on the vehicle configuration screen? If you can post them up I'll be able to see what's happening Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
15th May 2017, 22:33 | #9 | |
Loves to post
MG-ZT190 Join Date: Oct 2015
Location: Kopeysk Town
Posts: 413
Thanks: 144
Thanked 9 Times in 9 Posts
|
Quote:
VIN number matches on all the units. But the ZCS codes in the BCU differ from the codes of other units. Block Parking system T4 does not specify when connecting. Photo c ZCS codes can provide tomorrow morning. With Respect Denis |
|
15th May 2017, 22:39 | #10 |
Loves to post
MG-ZT190 Join Date: Oct 2015
Location: Kopeysk Town
Posts: 413
Thanks: 144
Thanked 9 Times in 9 Posts
|
Sorry.
Photo ZCS codes now provide. Found them in my computer. With Respect Denis |
Thread Tools | |
Display Modes | |
|
|