Radio Code

The Bear · 13th June 2007, 06:37

Hi peeps if i have the radio code disabled on my Zt and i change the unit (Harmony to Symphony) will the new unit ,ie the Symphony not need the radio code to be input once connected.

JohnDotCom · 13th June 2007, 08:44

You will need the Radio code of your new unit, Only the Hi Line does not require one.
It should be supplied on a Card with radio, in original Documents even written on unit sometimes or available from XPart for a charge. Supplier of unit should have it as its pointless selling without!
Im not sure if you had it permantently disabled if that is just fitted radio or any replacements to...........

raykay · 13th June 2007, 08:45

The requirement for the code for both the Harmony and Symphony can be enabled or disabled, but in each case you have to use the code to enable or disable it.

Greeners · 13th June 2007, 15:51

There is a test procedure to check the head unit to see if the code is enabled. I don't have the code for mine and it hasn't been enabled so I don't have any problems when it's removed or the battery is disconnected.

HTH

The Bear · 13th June 2007, 20:40

Hi Greeners dont suppose you or any other members have the test procedure.My Harmony unit has the code Dissabled .

Greeners · 13th June 2007, 20:50

It be here

http://www.the75andztclub.co.uk/foru...splay.php?f=31

The Bear · 14th June 2007, 05:10

Can't see any mention of the radio code option in the symphony listing.

raykay · 14th June 2007, 11:41

You can't test for the code, only enable or disable it, but you need the code to start with.

Press and hold the tuning 'up' button and switch on using the rotary on/off button, if it is disabled 'Code Enabled' will then show, if it is enabled it will ask for the code, after the correct code input, it will be disabled.

(Same for the Symphony, except the messages are 'Code On' and 'Code Off')

13th June 2007, 06:37	#1
The Bear Loves to post MG ZT 190+ Commision No 000297 Join Date: Nov 2006 Location: Stoke-On-Trent Posts: 321 Thanks: 0 Thanked 0 Times in 0 Posts	Radio Code Hi peeps if i have the radio code disabled on my Zt and i change the unit (Harmony to Symphony) will the new unit ,ie the Symphony not need the radio code to be input once connected.

13th June 2007, 08:45	#3
raykay I really should get out more....... Now Other Manufacturer Join Date: Nov 2006 Location: Co. Kerry Posts: 2,786 Thanks: 16 Thanked 310 Times in 283 Posts	The requirement for the code for both the Harmony and Symphony can be enabled or disabled, but in each case you have to use the code to enable or disable it. Last edited by raykay; 14th June 2007 at 11:32..

13th June 2007, 15:51	#4
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	There is a test procedure to check the head unit to see if the code is enabled. I don't have the code for mine and it hasn't been enabled so I don't have any problems when it's removed or the battery is disconnected. HTH __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

13th June 2007, 20:50	#6
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	It be here http://www.the75andztclub.co.uk/foru...splay.php?f=31 __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

14th June 2007, 05:10	#7
The Bear Loves to post MG ZT 190+ Commision No 000297 Join Date: Nov 2006 Location: Stoke-On-Trent Posts: 321 Thanks: 0 Thanked 0 Times in 0 Posts	Can't see any mention of the radio code option in the symphony listing. Last edited by The Bear; 14th June 2007 at 05:10.. Reason: typo

13th June 2007, 08:44	#2
JohnDotCom * Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006 Location: Abergele Posts: 28,735 Thanks: 0 Thanked 6 Times in 5 Posts	You will need the Radio code of your new unit, Only the Hi Line does not require one. It should be supplied on a Card with radio, in original Documents even written on unit sometimes or available from XPart for a charge. Supplier of unit should have it as its pointless selling without! Im not sure if you had it permantently disabled if that is just fitted radio or any replacements to...........

13th June 2007, 20:40	#5
The Bear Loves to post MG ZT 190+ Commision No 000297 Join Date: Nov 2006 Location: Stoke-On-Trent Posts: 321 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Greeners dont suppose you or any other members have the test procedure.My Harmony unit has the code Dissabled .

14th June 2007, 11:41	#8
raykay I really should get out more....... Now Other Manufacturer Join Date: Nov 2006 Location: Co. Kerry Posts: 2,786 Thanks: 16 Thanked 310 Times in 283 Posts	You can't test for the code, only enable or disable it, but you need the code to start with. Press and hold the tuning 'up' button and switch on using the rotary on/off button, if it is disabled 'Code Enabled' will then show, if it is enabled it will ask for the code, after the correct code input, it will be disabled. (Same for the Symphony, except the messages are 'Code On' and 'Code Off') Last edited by raykay; 14th June 2007 at 11:52..