|
||
|
15th February 2021, 14:54 | #1 |
Regular poster
MG ZT-T MG ZS-TD Join Date: Jan 2011
Location: Watford
Posts: 40
Thanks: 3
Thanked 4 Times in 4 Posts
|
Abs
Hi
I have a MG ZTT CDTI, When I start the car the ABS light goes on then off as it should, but when I brake the pedal modulates with the ABS , After a few times the ABS light comes on and ABS is disabled until next journey, When a new journey is made the ABS light comes on and stays on until you drive over 7MPH when it goes out, But when you brake the ABS operates again, The Speedo works fine, I tried to remove the NSF ABS sensor but can’t get it out, Any ideas what it is and also how do you get the sensors out Thanks Darrell. |
15th February 2021, 15:13 | #2 |
This is my second home
All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006
Location: Nr Sherborne But in Somerset..
Posts: 6,076
Thanks: 916
Thanked 1,214 Times in 768 Posts
|
most likely the rear sensors , backplates tend to rust bulge and then rub on the rear bearing edge, where the abs ring is . quite common.
do an Search on here . A link to start linky C
__________________
The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's Last edited by ceedy; 15th February 2021 at 15:17.. |
15th February 2021, 15:42 | #3 |
Regular poster
MG ZT-T MG ZS-TD Join Date: Jan 2011
Location: Watford
Posts: 40
Thanks: 3
Thanked 4 Times in 4 Posts
|
Thanks for the pointer,
|
|
|