Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 19th August 2021, 07:44   #1
AndyN01
This is my second home
 
AndyN01's Avatar
 
Toyota RAV4

Join Date: Jun 2017
Location: Tamworth
Posts: 3,054
Thanks: 2,478
Thanked 1,579 Times in 968 Posts
Default TOAF Error codes - where to start looking

Hi all.

Plugged TOAF in the other day and got these codes:

C7 Lever type sensor 1 - Short circuit to batt +; Sporadic error

F4 Can-Bus 244 - Open circuit; Sporadic error

20 Logic Power loss; Sporadic error

20 Soundgenerator rear off; Short circuit to ground; Open circuit; Error Present; Sporadic error (I guess this is something to do with the tow bar wiring that was found to be missing an earth when investigated at the recent Nano).

21 HVAC Front load sensor break; Error count 1; Error present

28 Clamp R missing; Error count 1; Error not present

(SHADOW) 42 - left low beam defect; Error count 1; Error not present


The electronics side of things I'm not so good at .

If someone call tell me which ones need some investigating and where to look I'll be grateful.

Cheers.

Andy.
__________________
Andy.

http://www.midlandsnanomeets.co.uk/
AndyN01 is offline   Reply With Quote
Old 19th August 2021, 08:48   #2
vitesse
I really should get out more.......
 
Rover 75 Saloon

Join Date: Jul 2011
Location: Gävle
Posts: 2,516
Thanks: 395
Thanked 823 Times in 652 Posts
Default

Sorry but none of your Toaf codes make sense to me - they are usually four digit codes preceded by a letter P eg. P1647. Run Toaf again and see if you get similar P codes.

Regards
vitesse is offline   Reply With Quote
Old 19th August 2021, 16:18   #3
AndyN01
This is my second home
 
AndyN01's Avatar
 
Toyota RAV4

Join Date: Jun 2017
Location: Tamworth
Posts: 3,054
Thanks: 2,478
Thanked 1,579 Times in 968 Posts
Default

Thanks.

I've done it again and got the same result. No sign of any "P" anything

Now wondering if I'm looking at the right/wrong thing.

I've had the lead since 2019 and used it before - FTDI ch340g VAG COM KKL 409.1 OBD2 Ⅱ K-Line KWP2000 ISO9141 USB FOR VW/AUDI and yes pins 7&8 are bridged.

Previously been able to get into live data for, say, diesel injectors but oddly I can't get the "Engine" tab to do anything at all. It goes to a screen asking about which engine (1.8/2.5/diesel) and then nothing.

Maybe a Win 10 update has mucked things up? Drivers?

It there an absolutely basic, step by step guide somewhere with some screenshots so I can read/see exactly what I'm supposed to be doing? Maybe a complete reinstall of TOAF?

As I said it's not my area of expertise.

Thanks in advance.
__________________
Andy.

http://www.midlandsnanomeets.co.uk/
AndyN01 is offline   Reply With Quote
Old 19th August 2021, 16:47   #4
vitesse
I really should get out more.......
 
Rover 75 Saloon

Join Date: Jul 2011
Location: Gävle
Posts: 2,516
Thanks: 395
Thanked 823 Times in 652 Posts
Default

Sorry not going to be much help here as I've only ever used Win10 and Toaf very briefly as XP is the normal one I use. Hopefully someone who understands Windows like Hogweed might drop by.

Anyway if you look at the link you'll see the typical error codes reported: https://the75andztclub.co.uk/forum/s....php?p=2659614

Regards
vitesse is offline   Reply With Quote
Old 20th August 2021, 17:24   #5
drewbie
Loves to post
 
drewbie's Avatar
 
Rover 75 Club SE 1.8T 03 plate.

Join Date: Jan 2009
Location: Tenterden
Posts: 277
Thanks: 28
Thanked 41 Times in 37 Posts
Default Pscan

Treat yourself to a Pscan Diagnostic Tester.
drewbie is offline   Reply With Quote
Old 20th August 2021, 17:28   #6
squire
Posted a thing or two
 
squire's Avatar
 
MGB GT, 2 Morris Minor Travellers

Join Date: May 2011
Location: Bilston
Posts: 1,658
Thanks: 1,610
Thanked 497 Times in 370 Posts
Question

Andy, have you had a word with Jamie? Might be best to get it on T4 to see what's what.

Martyn
squire is offline   Reply With Quote
Old 22nd August 2021, 09:20   #7
hogweed
I really should get out more.......
 
Vauxhall Insignia CDTi; MG TF 135

Join Date: Jan 2010
Location: Norn Iron
Posts: 2,942
Thanks: 942
Thanked 378 Times in 297 Posts
Default

Quote:
Originally Posted by vitesse View Post
Sorry not going to be much help here as I've only ever used Win10 and Toaf very briefly as XP is the normal one I use. Hopefully someone who understands Windows like Hogweed might drop by.

Anyway if you look at the link you'll see the typical error codes reported: https://the75andztclub.co.uk/forum/s....php?p=2659614

Regards

Hhmmm can't think of any way in which Windows would cause anything like this - if TOAF is behaving in a fundamentally different way from normal, I'd say it's TOAF... having said that, I can't see how that would happen either!


There may be a setting in TOAF which lets you toggle between error display modes or something, but that's just a guess. I haven't used it for a while now, sorry...
__________________
Past cars: MGB GT; Escort 1300 Sport; Vauxhall VX4/90; Marina Coupe TC; Celica ST (1972); Montego Turbo; Astra GTE 16V; Astra GSI 16V; Golf GTI 16V (Mk II); Sierra XR4x4 Estate; BMW 325i (E30); BMW M3 3.0; BMW M3 3.2 Evo. Left some of the more embarrassing ones out. And about 30 motorbikes.
hogweed is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 21:24.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd