Fog lights install - what have I forgotten?

[Robson Rover Repair]

2001 classic se diesel

I fitted my fog lights last year and knew I'd something else to do to make them work. Forgotten all about it as hadn't used them but now mot test shortly and need to sort it.

Now I used a loom off a car with fog lights so that includes the indicators etc all plug into the black blocks so the physical bumper side of things is done.

I'm pretty sure it's the wire from block to fuse box I need to sort.

I've switch in dash sorted, fuse and relay fitted.

But just incase can someone confirm for me exactly what pin I need to pop out in the fuse box and what I need to refit into the black plug?

As simple as possible folks, being colour blind I don't like to mess with wiring.

[clf]

Originally Posted by Colin_NI

2001 classic se diesel

I fitted my fog lights last year and knew I'd something else to do to make them work. Forgotten all about it as hadn't used them but now mot test shortly and need to sort it.

Now I used a loom off a car with fog lights so that includes the indicators etc all plug into the black blocks so the physical bumper side of things is done.

I'm pretty sure it's the wire from block to fuse box I need to sort.

I've switch in dash sorted, fuse and relay fitted.

But just incase can someone confirm for me exactly what pin I need to pop out in the fuse box and what I need to refit into the black plug?

As simple as possible folks, being colour blind I don't like to mess with wiring.

Is this one of the things that need to be activated in t4? Telling the lsm that front dogs are fitted?

Sent from my SM-A600FN using Tapatalk

[suzublu]

Didn't think front fogs were testable? Only rears

Sent from my moto g(7) power using Tapatalk

[roverbarmy]

Quick fix!

Ebay link.

[T-Cut]

Originally Posted by Colin_NI

- - - - can someone confirm for me exactly what pin I need to pop out in the fuse box and what I need to refit into the black plug?

Is this of any help?




I can post the full instructions if you need them.


TC

[Blink]

Originally Posted by clf

Is this one of the things that need to be activated in t4? Telling the lsm that front dogs are fitted?

I fitted front fogs to mine and the LSM sussed them out without T4.

[clf]

Originally Posted by Blink

I fitted front fogs to mine and the LSM sussed them out without T4.

It is not something I have had to do, however have seen something relating to them, which thinking of it may have been toaf. Whereby a box could be checked or unchecked. I cannot say what this did either, as I was searching for another issue that eluded me at the time.

Sent from my SM-A600FN using Tapatalk

[Jamiewelch]

Originally Posted by clf

It is not something I have had to do, however have seen something relating to them, which thinking of it may have been toaf. Whereby a box could be checked or unchecked. I cannot say what this did either, as I was searching for another issue that eluded me at the time.

Sent from my SM-A600FN using Tapatalk

The tick box was probably for hot / cold checking of the rear fogs . Front ones work without reprogramming with a T4.

[Blink]

Originally Posted by clf

It is not something I have had to do, however have seen something relating to them....

I saw something* too (before I fitted them) so I was expecting the LSM to play up. It didn't though - everything just worked straight away,

* A post on here somewhere - I don't remember TOAF being mentioned.

[Gareth.Richards]

Originally Posted by Colin_NI

2001 classic se diesel

I fitted my fog lights last year and knew I'd something else to do to make them work. Forgotten all about it as hadn't used them but now mot test shortly and need to sort it.

Now I used a loom off a car with fog lights so that includes the indicators etc all plug into the black blocks so the physical bumper side of things is done.

I'm pretty sure it's the wire from block to fuse box I need to sort.

I've switch in dash sorted, fuse and relay fitted.

But just incase can someone confirm for me exactly what pin I need to pop out in the fuse box and what I need to refit into the black plug?

As simple as possible folks, being colour blind I don't like to mess with wiring.

Mine worked straight away without T4 assistance!
Might be worth just testing power to the plug connection first.