|
||
|
1st January 2017, 16:27 | #1 |
Newbie
ROVER 600 Join Date: Dec 2016
Location: SOFIA
Posts: 4
Thanks: 0
Thanked 1 Time in 1 Post
|
Please help me Revive my Rover 600! Several questions please advice! :)
Hello people
Happy holidays i write u from abroad , so i live in very small countrie BG, here not much left from rover 600 series parts are hard to find and expensive, i recently revived my front coil spring i found old stocks on ebay boge, i like them a lot! Before Coil springs boge i used CS GERMANY, they died in 1-2 years so i spend money for nothing here shops sale garbage parts , Please i beg you people help me find a decent rear set or coil springs I want factory original genuine or lemforder or boge, i dont want my car to be lower its low enough already i preffer everything to be in stock conditionalso my shocks are kayba all 4 or them they are fine for now, recently my alternator died , when some electric car guy measure it when i put my headlights we see alternator charge my ac car battery at 12v this is not enough, it can be brushes inside alternator it can be everything, So far i changed 6 different alternators from denso /mitsuba/ to bosh to whatever all of them was used and NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- they dont last a long time, where i can get a new one at good price, i recently graduate from school thisi s my first car i love it so much i invested more than 7000gbp PARTS and labour alone ,they charge me like crazy here this includes car price + taxes + parts + labour, everything so far. My other trouble is as far as u know honda accord same years mk 5 use same engine etcs,so my car is actually accord mk5 but they use same parts as rover 600 i hope its not a problem, my headlights have lots of condensation inside i changed them all these years i own the car for like 5-6 years and i changed hella headlights with used several times and still no luck is there any way i can perm,fix them ? I also dont have abs is it possible to install one ? We recently fitted brand new abs brake pump,we also fitted new master cylinder and brake booster so my brake pedal is now above /up with my last brake master it was down, i plan to upgrade my brake disks from 260 to 280mm where i can get a genuine oem brake disks and brake pads good one for front? thanks a lot people i hope to receive nice answers. |
3rd January 2017, 22:23 | #2 |
Gets stuck in
Jaguar S type. Join Date: Mar 2014
Location: Reading
Posts: 706
Thanks: 730
Thanked 197 Times in 155 Posts
|
Hello Dimcho, welcome to the club. I'm afraid I don't know much at all about the 600 series but it may be worth posting these questions in the technical help forum on this site. Personally I rarely look in this section and I just happened to find your questions by pure chance.
I'm sure there are some very knowledgeable people who will be happy to help. Good luck. Alan. |
4th January 2017, 00:39 | #3 |
This is my second home
None * DROWNED Join Date: Aug 2007
Location: Cardigan
Posts: 33,339
Thanks: 1,257
Thanked 1,664 Times in 1,081 Posts
|
TBH, although some valuable knowledge is available on the 600 series from within our membership, Dimcho's best bet is to contact the forums that exists especially catering for those cars
__________________
Andrew Ich Dien Problem solving is... lateral thinking SEARCH FIRST ...ASK LATER... |
4th January 2017, 01:00 | #4 |
Gets stuck in
Jaguar S type. Join Date: Mar 2014
Location: Reading
Posts: 706
Thanks: 730
Thanked 197 Times in 155 Posts
|
Obviously I would agree with you on that Dragrad, but as I said, I know nothing about the 600 model and thought someone with more knowledge would be able to point the OP in the right direction.
|
4th January 2017, 01:22 | #5 |
Newbie
ROVER 600 Join Date: Dec 2016
Location: SOFIA
Posts: 4
Thanks: 0
Thanked 1 Time in 1 Post
|
|
10th January 2017, 16:44 | #6 |
This is my second home
75 model car Join Date: Apr 2011
Location: Newcastle upon Tyne
Posts: 20,169
Thanks: 4,008
Thanked 5,083 Times in 3,114 Posts
|
http://en.rover-club.net/model/rover-600-8 This might be better place to get your questions answered, good luck.
__________________
Cheers. Rich… |
Thread Tools | |
Display Modes | |
|
|