Could you ever buy

[Vantheman]

I remember 2CVs have a lot of M7 screws - try a 2CV specialist

A quick search found this:

https://www.franzose.de/en/Citroen-2...suchbegriff=m7

[T-Cut]

Originally Posted by macafee2

6mm is a bit sloppy in the hole, 8 will mean drilling

I suggest you try a 1/4" OD screw of whatever thread you fancy, BSF, BSW, BA, etc. Something like: https://www.ebay.co.uk/itm/BSF-Zinc-...UAAOSwGvhUIo0a

1/4" = 6.35mm


TC

[macafee2]

Originally Posted by breakfastinsmethwick

I have a few 7mm nylocs somewhere if it helps FOC.

Hold that thought as that is very kind of you, thank you.
Let me trace some screws, must be some somewhere

thanks again

macafee2

[macafee2]

Originally Posted by Vantheman

I remember 2CVs have a lot of M7 screws - try a 2CV specialist

A quick search found this:

https://www.franzose.de/en/Citroen-2...suchbegriff=m7

top man have found some but they may be too short at 20mm. I will check tomorrow but I really appreciate the heads up

macafee2

[macafee2]

Originally Posted by T-Cut

I suggest you try a 1/4" OD screw of whatever thread you fancy, BSF, BSW, BA, etc. Something like: https://www.ebay.co.uk/itm/BSF-Zinc-...UAAOSwGvhUIo0a

1/4" = 6.35mm


TC

Thanks, I wonder what their outside diameter is. I thought 6mm was 6mm but when I measured it was less than.

I have found their we site and will again check tomorrow

thanks

macafee2