Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 31st October 2021, 16:56   #1
Fred Pitt
Newbie
 
Fred Pitt's Avatar
 
Rover 75 Saloon

Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
Default Hot air fine when moving, but cool stationary?

Hi all.
Got a perplexing problem at moment, especially with winter coming.
I have a R75 Connie 2.5v6 petrol auto.
It's had a replacement stat a year ago, no leaks or drop in coolant level, but my mechanic fixed a leak from the short straight plastic pipe a few months ago.
I think he put some kind of rad fix solution in, which I wasn't happy about.
After that I had no hot air.
I asked him to flush out all the coolant and replace, and while at it flush out the matrix.
Since then coolant seems fine, no loss, and car runs fine, but hot air is fine when car is moving forward but as soon as you stop, (with engine running) the cabin air drops to just barely warm. Start moving forward and goes hot again???
When running the engine runs at around 81° which I know is a bit cool, but the hot air is fine when moving.
Air con was degassed and checked about six months ago.
Any ideas?
Thanks

Last edited by Fred Pitt; 31st October 2021 at 16:57.. Reason: Mistake
Fred Pitt is offline   Reply With Quote
Old 31st October 2021, 18:07   #2
Ducati750cc
Loves to post
 
Rover75 tourer

Join Date: Jun 2018
Location: Ashton
Posts: 428
Thanks: 121
Thanked 206 Times in 145 Posts
Default

When you say " but hot air is fine when car is moving forward but as soon as you stop, (with engine running) the cabin air drops to just barely warm. Start moving forward and goes hot again??? "


I presume you have the heater fan running at a reasonable speed both when moving and when stationary ?
__________________
Common sense isn't a gift, it's a punishment because you have to deal with everyone who doesn't have it.
Ducati750cc is offline   Reply With Quote
Old 31st October 2021, 21:09   #3
trikey
Premium Trader
 
trikey's Avatar
 
Rover 75

Join Date: Nov 2010
Location: Devon
Posts: 33,714
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
Default

You have an airlock!!!
__________________
Lest we forget..
trikey is offline   Reply With Quote
Old 1st November 2021, 07:58   #4
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,272
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Quote:
Originally Posted by trikey View Post
You have an airlock!!!


That's my first thought too. There's a specific procedure for refilling and bleeding the KV6. How handy are you with the spanners Darren?

Oh, and steer clear of that mechanic. Putting sealing potions in the coolant can, and has caused catastrophic long term problems.

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote
Old 3rd November 2021, 08:57   #5
Fred Pitt
Newbie
 
Fred Pitt's Avatar
 
Rover 75 Saloon

Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by SD1too View Post


That's my first thought too. There's a specific procedure for refilling and bleeding the KV6. How handy are you with the spanners Darren?

Oh, and steer clear of that mechanic. Putting sealing potions in the coolant can, and has caused catastrophic long term problems.

Simon
I'm quite handy.
What's annoying is I asked him to do a coolant system flush and refill, and and assume he would follow rover procedures.
Do I need to empty it again and refill, following rover kv6 procedures?
Fred Pitt is offline   Reply With Quote
Old 3rd November 2021, 10:21   #6
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,272
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Quote:
Originally Posted by Firmus Piett View Post
Do I need to empty it again and refill, following rover kv6 procedures?
That's what I would do Darren. I'd say there's a high chance of success. Here is the procedure.

Unfortunately garages are under pressure to work as quickly as possible so don't have the time to look through workshop manuals for any special requirements, particularly when those manuals were, as in MG Rover's case, on CD ROM.

Please keep us updated!

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote
Old 3rd November 2021, 08:57   #7
Fred Pitt
Newbie
 
Fred Pitt's Avatar
 
Rover 75 Saloon

Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by trikey View Post
You have an airlock!!!
Mmm, that's what I wondered.
Fred Pitt is offline   Reply With Quote
Old 3rd November 2021, 08:54   #8
Fred Pitt
Newbie
 
Fred Pitt's Avatar
 
Rover 75 Saloon

Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by Ducati750cc View Post
When you say " but hot air is fine when car is moving forward but as soon as you stop, (with engine running) the cabin air drops to just barely warm. Start moving forward and goes hot again??? "


I presume you have the heater fan running at a reasonable speed both when moving and when stationary ?
Yes fan on same speed. 75% speed.
Fred Pitt is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 15:21.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd