Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 24th December 2019, 02:53   #21
john adam
Avid contributor
 
1999 Rover 75 2.5 Connoisseur saloon

Join Date: May 2007
Location: Carterton, NZ
Posts: 106
Thanks: 18
Thanked 3 Times in 3 Posts
Default O rings

Can someone point me to the ebay site who sell the Viton seals at the end of the fuel rail.
__________________
1999 Rover 75 Connoisseur
2005 Rover 75 Connoisseur SE
1970 Rover 2000TC
1973 Rover P5B Coupe
1962 Rover P4 - 100
john adam is offline   Reply With Quote
Old 24th December 2019, 14:04   #22
T-Cut
This is my second home
 
Rover75 and Mreg Corsa.

Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,751
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
Default

Type 'fuel rail seals' in the ebay search box, you should find dozens of listings for these. Or go to DMGRS shop where you'll also fine them.


TC
T-Cut is offline   Reply With Quote
Old 20th December 2020, 22:12   #23
biffa75
Trader
 
biffa75's Avatar
 
Mk1 2004 tourer cdti + MK1 2003 Saloon CDT

Join Date: Nov 2015
Location: west yorkshire
Posts: 481
Thanks: 106
Thanked 91 Times in 57 Posts
Default

So glad I found this thread! Many thanks for the pictures that have been posted.

The metal fuel feed pipe that clips into the injection rail. When I removed my fuel feed pipe... The seals and spacers came with the pipe.

I've sourced new seals from dmgrs, I have the bigger black spacer that sits up against the metal silver locking clip and then two o rings. I aren't sure if I'm missing another smaller spacer that goes between the two o rings? I also want to ask.. who else has replaced the rubber o rings, if so how did you replace them? Build the spacers and o rings up on the pipe and then slide the pipe into the injection rail
Or
Do the spacers and seals have to be fitted I to the inside of the injection rail and then the pipe slid Into the injection rail?
Or does it not matter?

I don't have a leak or anything and it appears fairly firm in all honesty, but if I'm missing that small spacer that goes between the two o rings, I'd sooner have it in place if it prevents a possible leak, despite not having one at the moment...

Thanks in advance,
I know I've asked this question in numerous places but really need an answer quick as the rover is our daily.

Thanks
Rob
biffa75 is offline   Reply With Quote
Old 14th November 2022, 15:11   #24
Ayman
Newbie
 
Rover 75 Saloon

Join Date: Nov 2020
Location: Khartoum
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I need the inside seal + metal clip
What are the part number(s) ?

Last edited by Ayman; 15th November 2022 at 06:03..
Ayman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 13:14.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd