|
||
|
12th October 2021, 20:16 | #1 |
Avid contributor
Rover 75 Saloon Join Date: May 2021
Location: Stowmarket
Posts: 118
Thanks: 17
Thanked 9 Times in 7 Posts
|
Reverse Lights not Working
Hi
My 75 has had some work being done but now the reverse lights won’t work. I think it’s a switch that wasn’t connected but just want to confirm with some more mechanically-minded people! Thank you all Sent from my iPhone using Tapatalk
__________________
-Leyton and Pearl |
12th October 2021, 20:36 | #2 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,788
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
The switch in the gearbox is prone to failure and is a cheap and easy swap, check that it is plugged in first though!
Nearside wheel off and look towards the gearbox, you will see the switch and hopefully the wire that should be plugged in.
__________________
Lest we forget..
|
12th October 2021, 21:32 | #3 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,732
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Quote:
1 2 Locate the plug on the switch. 2 To change the switch out you will need 19mm deep socket 3 Lift the tag to remove the plug loom. 4 5 Plug in the new switch to make sure it's working, then press in the end. 6 Sometimes the old switch can stick so check that the same once removed. You can now use the 19mm socket to remove the switch. 6 7 8 Add the new switch. 9 Nip it up do not over tighten the switch. 10 Refit the plug wiring. 11 good luck Arctic
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
|
|