|
|
|
|
|
|
||
|
|
||
23rd January 2022, 10:10
|
#1 |
|
Gets stuck in
Rover 75 Contemporary SE 2.0 Diesel Auto 2005 Facelift Join Date: Dec 2010
Location: Norwich
Posts: 589
Thanks: 90
Thanked 67 Times in 47 Posts
|
Instrument Cluster Removal HELP pls
OK, so I have my inst cluster booked in with Rick for a new display.
I started to remove the cluster following info found on here. I have the cover out, the screw for the cluster out. Tried to ease the cluster out, but it will only come forward a few mm! Wiggling left/right as I pull. Removed the cover under the steering wheel, above the driver's knees. I can just about reach the cluster from underneath, but not able to move the cluster any more. I now have the wood dash trim pulled out and can get a little bit more movement, but not enough to get the cluster out. What am I doing wrong? Do I need to be MORE aggressive with my pulling? Any suggestions? Steve
__________________
Mods Fitted: Cruise Control; FBH with GSM (was FrenchMike's Remote) & dash button; Rear Blind; In-line Thermostat; wired in front & rear cameras; Mercedes DRL +DRL2; twin horns, twin usb power outlets, digital coolant temperature readout, Real Walnut dash, Walnut & black leather steering wheel, Walnut Handbrake grip, Towbar with full Rover harness. Rear seat cup holders. Wanted: Walnut auto gear stick handle Mods to do: all done  , need to come up with some more.
|
|
|
|
|
Threaded Mode