Front hub carrier, offside

p2roverman · 24th August 2021, 18:25

Would one of the breakers be able to supply an offside front wheel bearing carrier with bearing fitted, preferably with the ABS sensor still in place.
I’m thinking that fitting the complete unit is going to be quicker than fitting a new bearing to mine. Obviously the transducer ring in the bearing needs to be ok.

MGR South Devon · 24th August 2021, 20:05

Quote:

Originally Posted by p2roverman

Would one of the breakers be able to supply an offside front wheel bearing carrier with bearing fitted, preferably with the ABS sensor still in place.
I’m thinking that fitting the complete unit is going to be quicker than fitting a new bearing to mine. Obviously the transducer ring in the bearing needs to be ok.

We might be apply to supply this for you if you can give us a call

p2roverman · 26th August 2021, 16:53

Quote:

Originally Posted by MGR South Devon

We might be apply to supply this for you if you can give us a call

Thanks for the offer. However today the sensor is behaving perfectly. Perhaps a brief circuit break which knocked out the speedo for the rest of the journey
However I’ll remember you for future parts

24th August 2021, 18:25	#1
p2roverman Gets stuck in Rover 75 Connie Tourer & Connie SE Saloon & Club SE Tourer Join Date: Sep 2014 Location: Leeds Posts: 975 Thanks: 199 Thanked 71 Times in 59 Posts	Front hub carrier, offside Would one of the breakers be able to supply an offside front wheel bearing carrier with bearing fitted, preferably with the ABS sensor still in place. I’m thinking that fitting the complete unit is going to be quicker than fitting a new bearing to mine. Obviously the transducer ring in the bearing needs to be ok.