|
||
|
5th September 2009, 11:58 | #1 |
This is my second home
MG6 TL Join Date: Nov 2006
Location: Tarn
Posts: 5,269
Thanks: 2
Thanked 46 Times in 37 Posts
|
S-L-O-W Puncture x 3
I have THREE slow punctures on my ZR! Losing between 1-2 PSI each daily
The tyres are quite new, so reluctant to replace them. Options: 1. Live with it & keep inflating them every couple of days. 2. Go to local tyre place & let then have a look, but as it's a slow puncture, bet they don't find the cause. 3. Squirt half a can of tyre puncture goo into each one & hope that seals them. Thoughts?
__________________
http://www.wcgsig.com/115562.gif |
5th September 2009, 12:13 | #2 | |
This is my second home
MG ZT-T 190 Monogram Typhoon Join Date: Jan 2009
Location: Oxfordshire
Posts: 4,707
Thanks: 328
Thanked 557 Times in 443 Posts
|
Quote:
I wouldn't use goo. May seal the leak but will probably put your wheels out of balance. Really only a ' get you home ' fix IMHO. Have you checked the valves? Cores maybe need tightening up. Could it be leaking around the rim. Sometimes if the laquer finish on the wheels is damaged the alloy corrodes and the tyre bead won't seal properly? |
|
5th September 2009, 13:32 | #3 |
Passed Away
2002 Pale Blue. Rover 75 CDTi Connoisseur auto. 170K miles Join Date: Dec 2008
Location: Near the M67.
Posts: 14,509
Thanks: 199
Thanked 585 Times in 397 Posts
|
Hi Tatts. Most slow leaks are caused by dogs peeing on car wheels, the urine reacts with the ally and causes tiny bubles to form and eventually air starts to escape..
The cure is, take the tyre off and run some emery cloth round the rims. My local garage did mine for me at a fiver a wheel including balancing. and I have had no problems with them since. The wheels that is.. heh heh.. . |
5th September 2009, 13:57 | #4 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
Hi mate, most likely cause is the rims corroding between the tyre and rim.
MGR alloys aren't exactly known for they're corrosion resistance. A tyre place should be able to sort out cleaning them up and re-seating the tyres. I would avoid the tyre foam like the plague. Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
5th September 2009, 21:15 | #5 | |
Gets stuck in
'51 Rover 75 2.5 V6 Conn. Purchased 02/05 Join Date: Dec 2006
Location: Whitby
Posts: 571
Thanks: 8
Thanked 33 Times in 22 Posts
|
Quote:
|
|
5th September 2009, 21:46 | #6 |
This is my second home
MG6 TL Join Date: Nov 2006
Location: Tarn
Posts: 5,269
Thanks: 2
Thanked 46 Times in 37 Posts
|
Off to the tyre place then Monday!
I've instructed my dog NOT to use my wheels as a cocking post anymore, but I doubt he'll listen to me! Cheers gents...
__________________
http://www.wcgsig.com/115562.gif |
|
|