Drivers car seat

Rev Jules · 29th October 2017, 14:51

Would there be an inline fuse for the drivers seat as it has stopped working.

Rev

roverbarmy · 29th October 2017, 15:06

As you've been messing with the wiring, check the connections under the seat!

Rev Jules · 29th October 2017, 15:57

Quote:

Originally Posted by roverbarmy

As you've been messing with the wiring, check the connections under the seat!

No I haven't I only went under there to check the connection for the air bag?
I did not pull any wires, I tried to move the seat forward to get more room under the seat beforehand that's when I noticed the seat would not move electrically.

Rev

Mickyboy · 29th October 2017, 20:07

Okay try this,

Unplug the black control module under the seat it has a large connector block connected to it leave it off for 30 seconds plug it back in then try the seat, you may find that the seat control module may be on its way out
Mick

29th October 2017, 14:51	#1
Rev Jules This is my second home Rover 75 Tourer+ Join Date: Mar 2011 Location: Radcliffe on Trent Posts: 10,711 Thanks: 7,308 Thanked 3,929 Times in 2,051 Posts	Drivers car seat Would there be an inline fuse for the drivers seat as it has stopped working. Rev

29th October 2017, 15:06	#2
roverbarmy This is my second home Roverless + 1.7D Sportage Join Date: Aug 2014 Location: East Norfolk Posts: 7,050 Thanks: 729 Thanked 2,021 Times in 1,449 Posts	As you've been messing with the wiring, check the connections under the seat! __________________ Oil in my veins!

29th October 2017, 20:07	#4
Mickyboy SERVICING AND DEALER DIAGNOSTICS MG ZT CDTI 135 + & MGZT CDTI AUTO 160 & ROVER 75 TOURER CDTI 160 TROPHY YELLOW Join Date: Aug 2013 Location: Hernebay Posts: 4,331 Thanks: 818 Thanked 2,414 Times in 1,141 Posts	Okay try this, Unplug the black control module under the seat it has a large connector block connected to it leave it off for 30 seconds plug it back in then try the seat, you may find that the seat control module may be on its way out Mick __________________ [SIGPIC][/SIGPIC] T4 Owner Jobs done : new UBP, Spy hole mod, Rear hub(wheel bearing),plenum cleaned and emptied, Inline thermostat fitted,Full service, In car Digital tv/DVD Bluetooth Satnav etc, Replaced UBP, Restored headlights,Fixed airbag connection.replaced HP pump,replaced rear light seals,changed intercooler O rings. Jobs to do: ,replace drivers lock,.[/SIZE]