|
||
|
12th May 2011, 19:28 | #1 |
Regular poster
MG ZT 2.0 CDTi Join Date: Sep 2009
Location: Sunderland
Posts: 57
Thanks: 0
Thanked 0 Times in 0 Posts
|
CDti Cam Sensor Position
Could someone please tell me where i can find the "cam sensor" on my CDTi 53 plate
__________________
Silver MG ZT CDTi 2003 |
12th May 2011, 19:50 | #2 |
Loves to post
Rover 75 CDT Join Date: Dec 2006
Location: Dublin
Posts: 470
Thanks: 0
Thanked 8 Times in 7 Posts
|
To the right of the oil filler cap, beneath the the engine cover.
|
12th May 2011, 19:51 | #3 |
Loves to post
MG EXPRESS Join Date: Dec 2010
Location: STOURBRIDGE
Posts: 439
Thanks: 0
Thanked 4 Times in 4 Posts
|
It's under the engine cover on the cam cover close to the oil filler cap
|
12th May 2011, 20:19 | #4 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,713
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Hi Take a look at these pics 1&2
On one you can see it top left by the oil filler cap with the leads going into it 1 Pic 2 shows the 3 wires leading to it. to remove disconnect the wiring plug from the sensor, undo the torx screw 5mm socket works a treat,discard the seal if damaged in the book it says fit new one most times the O-ring is fine. 2
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " Last edited by Arctic; 25th January 2022 at 10:23.. |
12th May 2011, 20:26 | #5 |
Regular poster
MG ZT 2.0 CDTi Join Date: Sep 2009
Location: Sunderland
Posts: 57
Thanks: 0
Thanked 0 Times in 0 Posts
|
Cheers lads for the help found it ok
__________________
Silver MG ZT CDTi 2003 |
24th January 2022, 09:48 | #6 |
Posted a thing or two
R 75 Tourer diesel Conny 2002, V6 Conny saloon petrol 2003 Join Date: Mar 2013
Location: Taunton
Posts: 1,129
Thanks: 212
Thanked 406 Times in 223 Posts
|
Pics replaced
I also needed to find where the cam sensor was today for my diesel - and Steve's pics had gone AWOL - so here they are:
1. Remove engine cover (8mm socket) 2. Remove the one holding screw (4mm socket).
__________________
Rover 75 Tourer Conny 2002 remapped 160 auto, R75 V6 2.5L auto Connoisseur 2003 |
25th January 2022, 08:13 | #7 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
Good update for a ten year old thread.---Well done.---
|
25th January 2022, 08:40 | #8 |
Loves to post
Rover 75 CDTi Manual Saloon + Rover 75 CDTi Auto Saloon Join Date: May 2007
Location: Edinburgh
Posts: 417
Thanks: 170
Thanked 42 Times in 33 Posts
|
Nice pics and info all the same, thank you :-)
__________________
Rover 75 Saloon CDTi Contemporary SE +pack |
|
|