MOT today

tigers1941 · 8th May 2019, 20:31

Well my 2002 Rover75 Classic SE passed its MOT today with no advisories.
Failed in the morning on two issues the Hand Brake and a Track Rod End.
I use MS Cars in Worksop and I think they do a great job, they fitted a new Track Rod End and Hand Brake Shoes, also both back plates were corroded so they had to modify the fittings to hold the shoes correctly.
So one happy bunny, it is such a relief when you get a pass.

Rogue · 8th May 2019, 20:53

Congratulations

smudge.g · 9th May 2019, 12:32

Well done on the pass, a big sigh of relief no doubt! (my handbrake shoe - retaining pin also was found to be broke few weeks back, replaced with a new bolt/nut and then noticed the other side had been replaced in a similar fashion by the previous owner!!)

BoroRover · 9th May 2019, 15:11

Congrats on the pass. Happy Rovering !!

markypicks · 9th May 2019, 18:22

congrats on the pass yes its a nice feeling ,mine needs doing in november so ive got some time to sort the issues out rgds amrk

8th May 2019, 20:31	#1
tigers1941 Loves to post Rover75 Saloon Join Date: Jul 2012 Location: Worksop Posts: 273 Thanks: 11 Thanked 28 Times in 20 Posts	MOT today Well my 2002 Rover75 Classic SE passed its MOT today with no advisories. Failed in the morning on two issues the Hand Brake and a Track Rod End. I use MS Cars in Worksop and I think they do a great job, they fitted a new Track Rod End and Hand Brake Shoes, also both back plates were corroded so they had to modify the fittings to hold the shoes correctly. So one happy bunny, it is such a relief when you get a pass.

8th May 2019, 20:53	#2
Rogue I really should get out more....... 75 CDT SE 160 Saloon Join Date: May 2017 Location: Thorpe St Andrew, Norwich Posts: 2,645 Thanks: 1,386 Thanked 1,096 Times in 774 Posts	Congratulations __________________ Glutton for punishment --- Previously ... 2.6 SD1 x 2, 3.5 SD1, 820S, 820Si x2, 216 Gsi, 220T saloon, 414, 45 1.4 x2 and now a Cowley 75 CDT

9th May 2019, 12:32	#3
smudge.g Gets stuck in 75 Tourer CDTi Connie SE Join Date: Jun 2017 Location: Keith, Banffshire Posts: 686 Thanks: 431 Thanked 132 Times in 105 Posts	Well done on the pass, a big sigh of relief no doubt! (my handbrake shoe - retaining pin also was found to be broke few weeks back, replaced with a new bolt/nut and then noticed the other side had been replaced in a similar fashion by the previous owner!!) __________________ My 75 Tourer CDTi was born Saturday, 21st June 2003 @ 09:50 My 75 was the 18,749th 75 Tourer to run off the production line, out of 27,407 It was the 195th 75 Tourer CDT Connoisseur SE (135) to be made out of 2,074 and the 1,789th 75 Tourer in Wedgewood Blue Metallic (code: JEL) to be made out of 1,871 Wedgewood Blue Metallic 75 Tourers

9th May 2019, 15:11	#4
BoroRover Posted a thing or two Rover 75 Join Date: Sep 2016 Location: Middlesbrough Posts: 1,518 Thanks: 1,861 Thanked 723 Times in 471 Posts	Congrats on the pass. Happy Rovering !!

9th May 2019, 18:22	#5
markypicks Gets stuck in rover 75 saloon cdt club se re map 160 bhp Join Date: Dec 2018 Location: sheffield Posts: 558 Thanks: 227 Thanked 169 Times in 135 Posts	congrats on the pass yes its a nice feeling ,mine needs doing in november so ive got some time to sort the issues out rgds amrk