75 saloon rear boot badge (part number wanted)

generalkelly · 27th September 2009, 19:24

Hello all, does anyone know the part number for a replacement rover boot badge for a 75 saloon please?

Thanks for any help given..

Rich

Parker · 27th September 2009, 19:55

Hi again,

Is it the badge on the boot handle itself, the small one that fades?

Then it is DAB000100

Stocked at Rimmers - Look here: http://www.rimmerbros.co.uk/Item--i-DAB000100

tone · 27th September 2009, 21:57

Is it possible to fit one that doesn't fade??

JohnDotCom · 27th September 2009, 21:59

trebor · 28th September 2009, 06:33

Quote:

Originally Posted by tone

Is it possible to fit one that doesn't fade??

you can try spraying with a few coats of clear laquer before fitting which should prolong it a bit more

Reebs · 28th September 2009, 09:53

Quote:

Originally Posted by Parker

Hi again,

Is it the badge on the boot handle itself, the small one that fades?

Then it is DAB000100

Stocked at Rimmers - Look here: http://www.rimmerbros.co.uk/Item--i-DAB000100

Yep as Parker rightly says
These badges are readily available from Rimmers & any Xpart dealer

Cost = £10.16 + VAT

baxlin · 28th September 2009, 10:20

Quote:

Originally Posted by Reebs

Yep as Parker rightly says
These badges are readily available from Rimmers & any Xpart dealer

Cost = £10.16 + VAT

Reebs,

Finally ordered one today, thanks for pointing out on Saturday how faded mine was......................

Malcolm

Reebs · 28th September 2009, 11:32

Quote:

Originally Posted by baxlin

Reebs,

Finally ordered one today, thanks for pointing out on Saturday how faded mine was......................

Malcolm

Yes sorry I picked up on that Malcolm, but your car will look all the more splendid with a shiney new one attached

Here's the before and after shots on mine

The badges are self adhesive, just clean the surface of the number plate plinth, peel back the badge backing liner, and stick on (also remembering to remove the protective blue film on the front of the badge

27th September 2009, 19:24	#1
generalkelly Avid contributor Rover 75 1.8t Con SE & MGF 1.8i VVC Join Date: Aug 2009 Location: Llanelli Posts: 130 Thanks: 0 Thanked 0 Times in 0 Posts	75 saloon rear boot badge (part number wanted) Hello all, does anyone know the part number for a replacement rover boot badge for a 75 saloon please? Thanks for any help given.. Rich

27th September 2009, 19:55	#2
Parker This is my second home Jaguar XJ 3.0 V6 Auto (X350) & Hyundai Tuscon 2020 Join Date: Oct 2008 Location: Bridgend Posts: 10,342 Thanks: 69 Thanked 559 Times in 356 Posts	Hi again, Is it the badge on the boot handle itself, the small one that fades? Then it is DAB000100 Stocked at Rimmers - Look here: http://www.rimmerbros.co.uk/Item--i-DAB000100 __________________ http://www.the75andztclub.co.uk/foru...a585a72d1c.jpg "The only thing to do with good advice is pass it on. It is never any use to oneself" SOME VERY USEFUL LINKS SIMPLE DOOR MIRROR REPAIR FITTING CROFT DOOR FINISHERS FORUM RULES CLUB SHOP

27th September 2009, 21:59	#4
JohnDotCom * Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006 Location: Abergele Posts: 28,735 Thanks: 0 Thanked 6 Times in 5 Posts	No.

27th September 2009, 21:57	#3
tone Regular poster 75 Conny 2.5V6 SE Auto. Wedgy Blue. Join Date: Aug 2009 Location: South Norfolk Posts: 93 Thanks: 0 Thanked 0 Times in 0 Posts	Is it possible to fit one that doesn't fade??