Rover 75 2,5L engine - Page 2

Veine · 13th March 2022, 09:13

Fuse 1 and 3 is ok, starter turns normal no problems

Veine · 13th March 2022, 09:14

Fuse 1 and 3 OK starter turns OK

Veine · 13th March 2022, 09:48

Mike thank you for the offer looking forward to make the diagnostic I try to contact you on facebook regards Veine

SD1too · 13th March 2022, 09:49

OK thanks. Next inspect the ECM as described in post no. 8:

Quote:

Originally Posted by bl52krz

Have you checked to see if water damage has occurred to the ECU? This is located below the front windscreen under the cover on the nearside. Have you cleaned out the plenum where it is located. Water can get trapped in it If leaves get in there and block the drain holes.

Then I'd recommend that you get in touch with Mike (vitesse).

Simon

Veine · 13th March 2022, 10:14

Thank You for the help Simon

rab60bit · 13th March 2022, 11:34

Quote:

Originally Posted by Veine

Thank You for the help Simon

Keep us posted, would like to know if/how you get it going again, good luck

13th March 2022, 09:13	#11
Veine Newbie Rover 75 saloon Join Date: Sep 2021 Location: Vikmanshyttan Posts: 8 Thanks: 0 Thanked 3 Times in 3 Posts	Fuse 1 and 3 is ok, starter turns normal no problems

13th March 2022, 09:14	#12
Veine Newbie Rover 75 saloon Join Date: Sep 2021 Location: Vikmanshyttan Posts: 8 Thanks: 0 Thanked 3 Times in 3 Posts	Fuse 1 and 3 OK starter turns OK

13th March 2022, 09:48	#13
Veine Newbie Rover 75 saloon Join Date: Sep 2021 Location: Vikmanshyttan Posts: 8 Thanks: 0 Thanked 3 Times in 3 Posts	Mike thank you for the offer looking forward to make the diagnostic I try to contact you on facebook regards Veine

13th March 2022, 10:14	#15
Veine Newbie Rover 75 saloon Join Date: Sep 2021 Location: Vikmanshyttan Posts: 8 Thanks: 0 Thanked 3 Times in 3 Posts	Thank You for the help Simon