Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar
Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 21st March 2024, 16:53   #1
Chimble
Newbie
 
MG ZT

Join Date: Jan 2024
Location: Cambridge
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default ZT 160 KV6 coolant problem

Hi, I have a problem with the cooling system in my 160 KV6. The expansion tank has started to discharge coolant when hot. The heater is blowing hot but the radiator is cold and the pipe from the thermostat to the rad (the one with the bleed screw) is cold. Radiator fan is also running high but not helping matters because there is no heat in the radiator.

The thermostat and water pump were replaced in January but the problem has only just started. When I open the bleed screw water come out and the hose begins to get warm, between the thermostat and the bleed screw.

Is it likely an air lock has developed? Could there be a blockage in the radiator?
Scratching my head at the moment.

Point to note, when all was running well, the heater worked but not as hot as it is now. It suggests it is getting to hot on that side of the system, hence the discharge from the expansion tank.

Help would be much appreciated.
Chimble is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:24.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd