Navall 2 Update to 4.4.4 feedback and concerns

Radioguy · 28th January 2015, 23:45

I Am Sending the Update tomorrow afternoon so this thread is for your experiences concerns and feedback regarding Android 4.4.4 For our Navall 2 !

Mischief · 29th January 2015, 07:32

I shal keep an eye on my junk folder just in case

theridler · 29th January 2015, 09:52

What DO you mean by that???

Mischief · 29th January 2015, 09:54

Even though Sean's email addresses are on my safe sender list his mass emails for updates always end up in my junk folder

Chilljohn · 30th January 2015, 11:48

same here

looking forward to playing with the update, once again super service

theridler · 30th January 2015, 12:42

Well... I've now done the update to 4.4 ... haven't had much chance to look at it yet as I'm at work & should be working!!!!

Will report back when I get home...

Chilljohn · 30th January 2015, 13:13

update done

had a play with the unit , once I configured how I wanted the sound is greatly improved for me , more bass etc and a better equalizer , unit is a bit nippier too boots up and loads apps a tad faster

music player has been updated as has the radio and has a more "grown up" look to it

all in all a good update , many thanks for letting us have this

John

Polly · 30th January 2015, 13:35

Not done update yet,
But instruction sheet might be little confusing, the listed files are not there and instead only one file (MTCB-KGL.rar) + the instructions??

theridler · 30th January 2015, 13:38

What I did was to unzip that file, & then you get the update & mcu files...

Chilljohn · 30th January 2015, 13:43

same here , make sure that sd card is fat32 too , copy all 3 files after unzip to the root of the sd card , boot your head unit up then insert the sdcard into the GPS slot and up pops a message

nice to see a localish member theridler

28th January 2015, 23:45	#1
Radioguy Banned None Join Date: Feb 2010 Location: Here on the Forum Posts: 5,352 Thanks: 632 Thanked 822 Times in 573 Posts	Navall 2 Update to 4.4.4 feedback and concerns I Am Sending the Update tomorrow afternoon so this thread is for your experiences concerns and feedback regarding Android 4.4.4 For our Navall 2 !

29th January 2015, 07:32	#2
Mischief I really should get out more....... Rover 75 Join Date: Jul 2012 Location: Willenhall Posts: 2,897 Thanks: 181 Thanked 340 Times in 264 Posts	I shal keep an eye on my junk folder just in case __________________ Regards John [SIGPIC][/SIGPIC] My 75's General Information: This vehicle was the 49,501st 75 to run off the production line, out of 112,381 This vehicle was the 1st 75 1.8 T Club SE to be made out of 3,980 This vehicle was the 1st 75 in Celestial (Special Metallic) (code: IAI) to be made out of 19 Celestial (Special Metallic) 75s

29th January 2015, 09:52	#3
theridler Gets stuck in ZT-T+ CDTi '54 reg Join Date: Oct 2012 Location: Newark Posts: 973 Thanks: 199 Thanked 120 Times in 107 Posts	What DO you mean by that??? __________________ Regards John [SIGPIC][/SIGPIC]

29th January 2015, 09:54	#4
Mischief I really should get out more....... Rover 75 Join Date: Jul 2012 Location: Willenhall Posts: 2,897 Thanks: 181 Thanked 340 Times in 264 Posts	Even though Sean's email addresses are on my safe sender list his mass emails for updates always end up in my junk folder __________________ Regards John [SIGPIC][/SIGPIC] My 75's General Information: This vehicle was the 49,501st 75 to run off the production line, out of 112,381 This vehicle was the 1st 75 1.8 T Club SE to be made out of 3,980 This vehicle was the 1st 75 in Celestial (Special Metallic) (code: IAI) to be made out of 19 Celestial (Special Metallic) 75s

30th January 2015, 11:48	#5
Chilljohn Posted a thing or two MG HS PHEV Join Date: Nov 2006 Location: Worksop Posts: 1,576 Thanks: 58 Thanked 80 Times in 75 Posts	same here looking forward to playing with the update, once again super service __________________ John Free enable of digital speedo readout on message centre (takes 2 mins) Free Vis motor testing, via obd port courtesy of my delphi so no need to take anything apart, along with free code scan including abs and airbag message me for details

30th January 2015, 12:42	#6
theridler Gets stuck in ZT-T+ CDTi '54 reg Join Date: Oct 2012 Location: Newark Posts: 973 Thanks: 199 Thanked 120 Times in 107 Posts	Well... I've now done the update to 4.4 ... haven't had much chance to look at it yet as I'm at work & should be working!!!! Will report back when I get home... __________________ Regards John [SIGPIC][/SIGPIC]

30th January 2015, 13:13	#7
Chilljohn Posted a thing or two MG HS PHEV Join Date: Nov 2006 Location: Worksop Posts: 1,576 Thanks: 58 Thanked 80 Times in 75 Posts	update done had a play with the unit , once I configured how I wanted the sound is greatly improved for me , more bass etc and a better equalizer , unit is a bit nippier too boots up and loads apps a tad faster music player has been updated as has the radio and has a more "grown up" look to it all in all a good update , many thanks for letting us have this John __________________ John Free enable of digital speedo readout on message centre (takes 2 mins) Free Vis motor testing, via obd port courtesy of my delphi so no need to take anything apart, along with free code scan including abs and airbag message me for details

30th January 2015, 13:35	#8
Polly Posted a thing or two MG ZT 260 SE, ZS120, ZR105 Join Date: Mar 2014 Location: Peterhead Posts: 1,375 Thanks: 203 Thanked 350 Times in 241 Posts	Not done update yet, But instruction sheet might be little confusing, the listed files are not there and instead only one file (MTCB-KGL.rar) + the instructions??

30th January 2015, 13:38	#9
theridler Gets stuck in ZT-T+ CDTi '54 reg Join Date: Oct 2012 Location: Newark Posts: 973 Thanks: 199 Thanked 120 Times in 107 Posts	What I did was to unzip that file, & then you get the update & mcu files... __________________ Regards John [SIGPIC][/SIGPIC]

30th January 2015, 13:43	#10
Chilljohn Posted a thing or two MG HS PHEV Join Date: Nov 2006 Location: Worksop Posts: 1,576 Thanks: 58 Thanked 80 Times in 75 Posts	same here , make sure that sd card is fat32 too , copy all 3 files after unzip to the root of the sd card , boot your head unit up then insert the sdcard into the GPS slot and up pops a message nice to see a localish member theridler __________________ John Free enable of digital speedo readout on message centre (takes 2 mins) Free Vis motor testing, via obd port courtesy of my delphi so no need to take anything apart, along with free code scan including abs and airbag message me for details