Lower Plenum Drains solution! - Page 6

Jules · 22nd October 2010, 00:19

Evening Jose
£13.95 inc to Portugal

Regards
Jules

Air Rover · 22nd October 2010, 00:35

Quote:

Originally Posted by Jules

Evening Jose
£13.95 inc to Portugal

Regards
Jules

Hi again, Jules
Payment sent for a LHD shield.
Regards
José

NOCTURNAL · 23rd October 2010, 12:55

Just a quick Note to Publicly Thank Jules for the prompt arrival of the new Jules Plenum Drain Shield.
This might be a good time to point out that the new Plenum Drain shield is bent to 105° and not the original 90° as this was found to foul the wiper mechanism.

Jules furnished me with this information after I admitted snapping mine within 30 seconds of opening it

as ‘I Thought’ it should have been “bent a little further “

Jules suggested I might like to share the information with you all for info so that no-one else was as stupid as me

My embarrassment was whole and complete as I had carried out the box opening in the kitchen in front of the better half .....

I proceeded to say how neat it was adding “I think it has opened out a little”....

I then proceeded to flex it a little and promptly snapped it, to which I was treated to that withering look that only better halves can give, along with the comment of “That was Clever!!”

anyway, It's a nice piece of kit, and learn from the dunce....dont try and flex it

Nick

Gate Keeper · 9th November 2010, 19:01

Jules

I have two CDTi's and one V6 for an order, all RHD

How many guards should I order to cover the three?

Thanks

Phil

Jules · 9th November 2010, 21:00

Hi Phil
Three sets will do it!

Just to clear up any confusion.

RHD cars kits contain:

Qty 1 shield and 1 x black sponge filter
(both fit on Drivers side as passenger side already blocked off)

LHD Car kits contain
Qty 1 shield and 1 x black sponge filter
(both fit on Drivers side as passenger side already blocked off)

Jules · 9th November 2010, 21:01

Quote:

Originally Posted by Gate Keeper

Jules

I have two CDTi's and one V6 for an order, all RHD

How many guards should I order to cover the three?

Thanks

Phil

PS
Just pay the postage amount for one set

Rabett_Rover · 9th November 2010, 21:03

Phil if you wish, send them to me and I will fit the pair to L Jay and store the other 2 pairs. If you want that is.

Gate Keeper · 10th November 2010, 08:05

Thanks Jules - I will place an order for 3 sets and ask you to send them to Lewis so that he can put one set on LJ and keep the other two sets for me to fit to the other two CDTi's

Cheers

Phil

ALPACA · 16th November 2010, 03:41

Hi Jules, I saw your nifty kit on Wuzerk's car yesterday and I have just made a paypal payment to you for mine. A great design, and I look forward to fitting it. Many thanks matey.

Regards

Paul

Wolves 75 · 16th November 2010, 04:28

Quote:

Originally Posted by ALPACA

Hi Jules, I saw your nifty kit on Wuzerk's car yesterday and I have just made a paypal payment to you for mine. A great design, and I look forward to fitting it. Many thanks matey.

Regards

Paul

Hi Paul, sorry for the mini hi-jack
Have not seen you here for ages, good to know your ok, I have offen wondered where you had gone
Good to see you here
Regards
Lyndon......

22nd October 2010, 00:19	#51
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Evening Jose £13.95 inc to Portugal Regards Jules __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

9th November 2010, 21:00	#55
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Hi Phil Three sets will do it! Just to clear up any confusion. RHD cars kits contain: Qty 1 shield and 1 x black sponge filter (both fit on Drivers side as passenger side already blocked off) LHD Car kits contain Qty 1 shield and 1 x black sponge filter (both fit on Drivers side as passenger side already blocked off) __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

16th November 2010, 03:41	#59
ALPACA Gets stuck in MG HS EXCLUSIVE DCT Join Date: Jun 2009 Location: KENT Posts: 730 Thanks: 51 Thanked 108 Times in 25 Posts	Hi Jules, I saw your nifty kit on Wuzerk's car yesterday and I have just made a paypal payment to you for mine. A great design, and I look forward to fitting it. Many thanks matey. Regards Paul __________________ MG HS EXCLUSIVE DCT - Dynamic Red Tri-Coat with Sardana red Bader leather interior. K&N filter.Weathershields.Mudflaps.Sundshades.Slot mats.Quilted rear seat protector.Latch guards.Fabric & rubber mats.Fabric & rubber Loadliners.Full alloy spare.MG seatbelt covers.Aussie chrome tailgate strip & bumper protector.Autoglymn lifeshine.Indonesian tailgate badge.Chrome steering wheel cover.

23rd October 2010, 12:55	#53
NOCTURNAL Gets stuck in MG ZT-260SE Join Date: Nov 2006 Location: Norwich Posts: 645 Thanks: 17 Thanked 8 Times in 7 Posts	Just a quick Note to Publicly Thank Jules for the prompt arrival of the new Jules Plenum Drain Shield. This might be a good time to point out that the new Plenum Drain shield is bent to 105° and not the original 90° as this was found to foul the wiper mechanism. Jules furnished me with this information after I admitted snapping mine within 30 seconds of opening it as ‘I Thought’ it should have been “bent a little further “ Jules suggested I might like to share the information with you all for info so that no-one else was as stupid as me My embarrassment was whole and complete as I had carried out the box opening in the kitchen in front of the better half ..... I proceeded to say how neat it was adding “I think it has opened out a little”.... I then proceeded to flex it a little and promptly snapped it, to which I was treated to that withering look that only better halves can give, along with the comment of “That was Clever!!” anyway, It's a nice piece of kit, and learn from the dunce....dont try and flex it Nick

9th November 2010, 19:01	#54
Gate Keeper This is my second home 4X4 Join Date: Jul 2010 Location: Nairobi Posts: 20,071 Thanks: 8,286 Thanked 7,017 Times in 4,160 Posts	Jules I have two CDTi's and one V6 for an order, all RHD How many guards should I order to cover the three? Thanks Phil

9th November 2010, 21:03	#57
Rabett_Rover This is my second home Rover 75 Join Date: Nov 2006 Location: - Posts: 5,895 Thanks: 0 Thanked 7 Times in 7 Posts	Phil if you wish, send them to me and I will fit the pair to L Jay and store the other 2 pairs. If you want that is.

10th November 2010, 08:05	#58
Gate Keeper This is my second home 4X4 Join Date: Jul 2010 Location: Nairobi Posts: 20,071 Thanks: 8,286 Thanked 7,017 Times in 4,160 Posts	Thanks Jules - I will place an order for 3 sets and ask you to send them to Lewis so that he can put one set on LJ and keep the other two sets for me to fit to the other two CDTi's Cheers Phil