|
||
|
5th April 2020, 20:16 | #11 |
Newbie
Rover 75 Saloon Join Date: Dec 2019
Location: Glasgow
Posts: 15
Thanks: 1
Thanked 3 Times in 3 Posts
|
Thanks
Just want to say massive thanks for all the responses! Have ordered a new fuel filter and is on its way. Given our circumstances I have ordered the EGR bypass as well, better to have it and experiment with it, in case I get a sudden urge to feel handy.
Will also give a shot at cleaning the EGR valve as well, might finally be able to get it to idle smoothly. We can all dream though... :P Shug |
5th April 2020, 20:25 | #12 |
I really should get out more.......
MG ZT-T 260 Join Date: Feb 2016
Location: Witney
Posts: 2,503
Thanks: 6
Thanked 910 Times in 571 Posts
|
EGR has only one purpose, it is to lower the emissions buy increasing the temperature inside the combustion chamber. It will always reduce power but depending on how much exhaust gas is aloud into the chamber will depend on how much effect it has.
An internal combustion engine needs oxygen and fuel, if the combustion chamber is 100% full of this mixture it will produce the maximum amount of power, if you start filling it with other gases like exhaust gas it will produce less power, no in theory but fact. The problem is modern engines are designed to work with this mixture of exhaust gas, oxygen and fuel so if you remove the exhaust gas without allowing more air in there is little or no advantage. A good compromise on a lot of engines is to restrict the amount of exhaust gas buy fitting a plate with a hole, depending on your engine will determine the hole size but somewhere between 3 and 6 mm is usually enough. I also have a Transit van, with the EGR blocked it will run but the engine management light will come on and the engine will go into a partial limp mode, with a 5mm hole it runs great and no engine management light. On my 260 the same is also true, a blanking plate with a 3mm hole is enough to fool the system into thinking it is working as designed but I have a smoother idle, better pickup and a marginal improvement in fuel economy. Last edited by SCP440; 5th April 2020 at 20:30.. |
6th April 2020, 08:57 | #13 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,531
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
EGR lowers emissions by reducing the temperatures within the combustion chamber. Just like an oxyacetylene torch - the more oxygen you add the hotter the flame gets.
Talk of mixtures should be left to petrol engines. Diesels don't work on mixtures as such within the combustion chamber. |
6th April 2020, 12:38 | #14 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,618
Thanks: 385
Thanked 552 Times in 328 Posts
|
Who on earth thought it would be a good idea to make a device that will eventually make your inlet dirtier than your exhaust?
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s |
6th April 2020, 20:45 | #15 |
Loves to post
MG ZT Join Date: Dec 2018
Location: holt
Posts: 296
Thanks: 219
Thanked 112 Times in 49 Posts
|
|
Thread Tools | |
Display Modes | |
|
|