Rubber trim at bottom of windscreen - Page 2

Mike2000 · 14th July 2023, 17:38

I used AT2007 last November and just push fitted it, no adhesive/sealant and it's still in place. No need to remove the glass.

Arctic · 14th July 2023, 19:38

Quote:

Originally Posted by Mike2000

I used AT2007 last November and just push fitted it, no adhesive/sealant and it's still in place. No need to remove the glass.

Hi Mike.
That be this then, i am one owner which made a full length up out of two original type rubber.

https://www.sealsdirect.co.uk/shop/at2007-21554

Mike2000 · 15th July 2023, 14:46

Quote:

Originally Posted by Arctic

Hi Mike.
That be this then, i am one owner which made a full length up out of two original type rubber.

https://www.sealsdirect.co.uk/shop/at2007-21554

Yes that is the one.

MissMoppet · 16th July 2023, 15:39

Quote:

Originally Posted by lida

Thank you, Martyn! The outfit still exists and they have stock of AT2007. (U Channel With Lip - 1.7mm Panel x 18mm Height). It's just for the bottom of my windscreen ..... does the glass need to be removed, and do you favour the adhesive or the silicone sealant?

They're both a few mil short on mine - but does it matter?

squire · 15th November 2023, 15:07

Quote:

Originally Posted by lida

Thank you, Martyn! The outfit still exists and they have stock of AT2007. (U Channel With Lip - 1.7mm Panel x 18mm Height). It's just for the bottom of my windscreen ..... does the glass need to be removed, and do you favour the adhesive or the silicone sealant?

Sorry, I've only just seen your reply, hope you've got it sorted now. FYI I never bothered to stick it down, the only thing is that I occasionally used to knock it off when cleaning the car but I then used ti give it a good clean and the scuttle as well and push it back on.

Again, apologies for the very late reply.

Martyn

bl52krz · 16th November 2023, 18:48

thanks to all replies. Had forgotten about this post from 3 years ago, and I never had the decency to reply. I want my legs smacking. Thanks to the poster who recommended seals direct, as I used that recommendation at the time. Never stuck it down, aka Martyn, and now and again I knock it off. No problem. Just push it back on.

14th July 2023, 17:38	#11
Mike2000 Regular poster Rover 75 Join Date: May 2018 Location: Bedford Posts: 77 Thanks: 9 Thanked 9 Times in 9 Posts	I used AT2007 last November and just push fitted it, no adhesive/sealant and it's still in place. No need to remove the glass. __________________ Mike

16th November 2023, 18:48	#16
bl52krz This is my second home Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008 Location: Birmingham Posts: 11,387 Thanks: 6,587 Thanked 2,262 Times in 1,729 Posts	thanks to all replies. Had forgotten about this post from 3 years ago, and I never had the decency to reply. I want my legs smacking. Thanks to the poster who recommended seals direct, as I used that recommendation at the time. Never stuck it down, aka Martyn, and now and again I knock it off. No problem. Just push it back on. __________________ Great Barr, Birmingham.