|
||
|
7th April 2020, 11:24 | #1 |
Gets stuck in
Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008
Location: Chatteris, Cambridgeshire
Posts: 902
Thanks: 320
Thanked 159 Times in 127 Posts
|
Wanted - broken Dyson or bits
Rather unusual request!
Dyson DC44 animal, the one with the motorised brush head (on the floor). Anyone got a broken one or some bits? I've lost the bearing at the end of the rotating brush. Stewart |
8th April 2020, 11:53 | #2 |
Gets stuck in
Rover 75 saloon Join Date: Jan 2019
Location: Horley
Posts: 877
Thanks: 703
Thanked 267 Times in 198 Posts
|
Dc 44
Hi I have one, I still use the hand held but don't need the floor unit, which bit is it? Can I remove it?
Regards Jennifer
__________________
2002 Connie SE CDTi Raven Black saloon 1978 MGBGT Brooklands Green |
8th April 2020, 15:02 | #3 |
Gets stuck in
Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008
Location: Chatteris, Cambridgeshire
Posts: 902
Thanks: 320
Thanked 159 Times in 127 Posts
|
Thanks for reply. I have some pics to explain.
1. A view of the head on my DC44. It is possible other heads will fit, or contain the part I need. 2. The LH end of the head, where the brush comes out. This is the wrong end. 3 The RH end of the brush roller. Not the triangular centre. This locates in my missing part. 4. The RH end of the head, with the part missing, though the silver screw is in place. I've called it a bearing, though I suppose it realler is an adaptor that fits onto the bearing that is still in the head. Last edited by StewartIngram; 26th September 2021 at 08:48.. |
8th April 2020, 16:05 | #4 |
Gets stuck in
Rover 75 saloon Join Date: Jan 2019
Location: Horley
Posts: 877
Thanks: 703
Thanked 267 Times in 198 Posts
|
Part
Ok am sure I have that, let me have your address and will post it to you.
Cheers Jennifer
__________________
2002 Connie SE CDTi Raven Black saloon 1978 MGBGT Brooklands Green |
8th April 2020, 18:00 | #5 |
Gets stuck in
Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008
Location: Chatteris, Cambridgeshire
Posts: 902
Thanks: 320
Thanked 159 Times in 127 Posts
|
Thanks, you have a PM
|
|
|