Tool earnt is keep big time

macafee2 · 19th April 2019, 15:39

A few years ago I bought a Bosch multi saw, similar to this
https://www.amazon.co.uk/Bosch-PMF-2...c=1&th=1&psc=1

I used it to remove the grout between the tiles in our shower. Did a good job and made light work of it.
I did however find it noisy and gave off too much vibration for prolonged use.

Anyway been using it for cutting cut outs into pieces of wood. The wood being 4 inches wide and 2 inches thick and I just wanted to cut out 2 inches wide and 1/2 inch deep 2 inches wide. This did the sides and back easily and left me to use a chisel to get the centres out.

Really earnt its keep. If you think of getting one go for one with low vibration and low db noise.

macafee2

19th April 2019, 15:39	#1
macafee2 This is my second home Rover 75 Saloon & Tourer Join Date: Sep 2012 Location: Lincoln Posts: 14,912 Thanks: 1,630 Thanked 3,032 Times in 2,181 Posts	Tool earnt is keep big time A few years ago I bought a Bosch multi saw, similar to this https://www.amazon.co.uk/Bosch-PMF-2...c=1&th=1&psc=1 I used it to remove the grout between the tiles in our shower. Did a good job and made light work of it. I did however find it noisy and gave off too much vibration for prolonged use. Anyway been using it for cutting cut outs into pieces of wood. The wood being 4 inches wide and 2 inches thick and I just wanted to cut out 2 inches wide and 1/2 inch deep 2 inches wide. This did the sides and back easily and left me to use a chisel to get the centres out. Really earnt its keep. If you think of getting one go for one with low vibration and low db noise. macafee2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode