Mk1 V6 Saloon Parts

Holland314 · 6th January 2019, 21:27

All of the following parts have just been removed from a Mk1 V6 saloon, manual.

Pictures will be added to the thread as I take them, over the next few days most likely, but please bear with me as I'm currently in the middle of a house move so as you can imagine everything is manic at the moment. PM me if any specific pics are required and provide your email address so I can send them to you directly.

Set of black leather seats, electric, heated, drivers memory, double piped. These are in very good condition, couple of little marks, nothing serious. The lumbar support knob/adjuster on the drivers seat has come off, still have it so you can re-attach it. Seat back pockets are in good condition, all fixings intact so the pockets aren't hanging off like a lot of them. Price is £50 collected as I need to get rid of them quickly, due to impending house move. Can be collected from CO9 4QP or CM3 6DN. NOW SOLD

Pair of 2.0 Litre Torpedo badges, good condition, £13 including delivery to mainland UK.

PPD jacking handle, good condition, £12 including delivery to mainland UK. NOW SOLD

PPD boot plinth, very good condition, three of the four fixings intact and complete with nuts and J-clips, one of the outer fixings (J-clip type) sheared off during removal so will need a repair, nothing insurmountable. £20 including delivery to mainland UK. NOW SOLD

FULL SET of four inner waist seals, the parts that usually bubble and distort. These are in fantastic condition, very hard to find a good set nowadays, no bubbling or distortion whatsoever and extremely clean. Just to be clear these are the trims/seals that fit at the top of the door cards, at the base of the window opening that the glass slides past. Price is £35 for the full set of four, including delivery to mainland UK.

Full set of four external b-pillar trims. The vertical black metal trims that fit at the rear of the front doors and the front of the rear doors, quite often they rust and bubble at the lower part of the trim just above where it fits behind the outer door skin. All extremely clean and no signs whatsoever of rust, rot, corrosion or bubbling. Getting rarer to find a set in this condition, price is £30 including delivery to mainland UK. NOW SOLD

Pair of PPD twin horns, with mounting brackets, plugs and a couple of inches or of loom, perfect for retro fitting so that you never have to be too embarressed to honk other road users with your budgie NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- single tone horn. £13 delivered to mainland UK. NOW SOLD

Key fob casing with Rover insignia embossed on the unlock button. Rare find and a lovely little touch. £10 delivered to mainland UK. NOW SOLD

FULL cruise control setup, as per title for a V6 manual. Set comprises;
Steering wheel switches;
ECU, interface unit, both with plug and few inches of loom, plus mounting bracket;
Dash master switch,with plug and few inches of loom;
Brake pedal switch, clutch pedal switch, with plugs and couple of inches of loom;
Vacuum pump, with hose to actuator;
Complete V6 throttle body, with actuator.
I believe this is everything required for a complete retrofit, but happily corrected if wrong. Price is £75 including delivery to mainland UK. NOW SOLD

PPD battery bolt and clamp, £10 delivered to mainland UK. NOW SOLD

Full set of reversing sensors and holders, in copperleaf (CDX is the paint code I believe, from memory!) including both parts of loom (behind bumper and inside boot) and the ECU, which is the later black type. £40 including delivery to mainland UK. NOW SOLD

Like I said pictures will be posted over the next few days as I take them, but any questions please ask and any other bits and bobs that might be required just drop me a PM.

Holland314 · 12th January 2019, 18:21

Bump on remaining items

maxi_crawf · 13th January 2019, 15:54

Hello Tom,

PM sent

Holland314 · 15th January 2019, 22:33

List updated with sold items, bump on everything else

Holland314 · 14th February 2019, 20:57

Bump, lots still available.

Seats really need to go now as have no room, so £20 for the set, or can be stripped down if anyone after covers, motors etc.

75 tinkerer · 15th February 2019, 22:44

Don't suppose you have a decent Copperleaf bonnet?

Pete

Holland314 · 16th February 2019, 19:45

Quote:

Originally Posted by 75 tinkerer

Don't suppose you have a decent Copperleaf bonnet?

Pete

Afraid not mate, car itself is long gone...

emm-gee-zed-tee · 16th February 2019, 19:53

You have a PM Tom >

Holland314 · 16th February 2019, 20:12

Quote:

Originally Posted by emm-gee-zed-tee

You have a PM Tom >

Just about to reply mate

hortonds · 17th February 2019, 08:55

Message sent

6th January 2019, 21:27	#1
Holland314 I really should get out more....... MG ZT-T Join Date: May 2014 Location: Haughley Posts: 2,311 Thanks: 481 Thanked 200 Times in 139 Posts	Mk1 V6 Saloon Parts All of the following parts have just been removed from a Mk1 V6 saloon, manual. Pictures will be added to the thread as I take them, over the next few days most likely, but please bear with me as I'm currently in the middle of a house move so as you can imagine everything is manic at the moment. PM me if any specific pics are required and provide your email address so I can send them to you directly. Set of black leather seats, electric, heated, drivers memory, double piped. These are in very good condition, couple of little marks, nothing serious. The lumbar support knob/adjuster on the drivers seat has come off, still have it so you can re-attach it. Seat back pockets are in good condition, all fixings intact so the pockets aren't hanging off like a lot of them. Price is £50 collected as I need to get rid of them quickly, due to impending house move. Can be collected from CO9 4QP or CM3 6DN. NOW SOLD Pair of 2.0 Litre Torpedo badges, good condition, £13 including delivery to mainland UK. PPD jacking handle, good condition, £12 including delivery to mainland UK. NOW SOLD PPD boot plinth, very good condition, three of the four fixings intact and complete with nuts and J-clips, one of the outer fixings (J-clip type) sheared off during removal so will need a repair, nothing insurmountable. £20 including delivery to mainland UK. NOW SOLD FULL SET of four inner waist seals, the parts that usually bubble and distort. These are in fantastic condition, very hard to find a good set nowadays, no bubbling or distortion whatsoever and extremely clean. Just to be clear these are the trims/seals that fit at the top of the door cards, at the base of the window opening that the glass slides past. Price is £35 for the full set of four, including delivery to mainland UK. Full set of four external b-pillar trims. The vertical black metal trims that fit at the rear of the front doors and the front of the rear doors, quite often they rust and bubble at the lower part of the trim just above where it fits behind the outer door skin. All extremely clean and no signs whatsoever of rust, rot, corrosion or bubbling. Getting rarer to find a set in this condition, price is £30 including delivery to mainland UK. NOW SOLD Pair of PPD twin horns, with mounting brackets, plugs and a couple of inches or of loom, perfect for retro fitting so that you never have to be too embarressed to honk other road users with your budgie NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- single tone horn. £13 delivered to mainland UK. NOW SOLD Key fob casing with Rover insignia embossed on the unlock button. Rare find and a lovely little touch. £10 delivered to mainland UK. NOW SOLD FULL cruise control setup, as per title for a V6 manual. Set comprises; Steering wheel switches; ECU, interface unit, both with plug and few inches of loom, plus mounting bracket; Dash master switch,with plug and few inches of loom; Brake pedal switch, clutch pedal switch, with plugs and couple of inches of loom; Vacuum pump, with hose to actuator; Complete V6 throttle body, with actuator. I believe this is everything required for a complete retrofit, but happily corrected if wrong. Price is £75 including delivery to mainland UK. NOW SOLD PPD battery bolt and clamp, £10 delivered to mainland UK. NOW SOLD Full set of reversing sensors and holders, in copperleaf (CDX is the paint code I believe, from memory!) including both parts of loom (behind bumper and inside boot) and the ECU, which is the later black type. £40 including delivery to mainland UK. NOW SOLD Like I said pictures will be posted over the next few days as I take them, but any questions please ask and any other bits and bobs that might be required just drop me a PM. Last edited by Holland314; 18th February 2019 at 10:19.. Reason: Updating sold items

17th February 2019, 08:55	#10
hortonds Avid contributor Rover 75 CDTI Tourer Automatic Join Date: Mar 2015 Location: Dunstable Posts: 196 Thanks: 4 Thanked 31 Times in 22 Posts	Message sent __________________ 300,000 miles and back on the road Jobs done: Everything you can possibly imagine ... I have the "Triggers Broom" of cars.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12th January 2019, 18:21	#2
Holland314 I really should get out more....... MG ZT-T Join Date: May 2014 Location: Haughley Posts: 2,311 Thanks: 481 Thanked 200 Times in 139 Posts	Bump on remaining items

13th January 2019, 15:54	#3
maxi_crawf Posted a thing or two R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006 Location: Kingston-upon-Hull Posts: 1,960 Thanks: 823 Thanked 426 Times in 274 Posts	Hello Tom, PM sent

15th January 2019, 22:33	#4
Holland314 I really should get out more....... MG ZT-T Join Date: May 2014 Location: Haughley Posts: 2,311 Thanks: 481 Thanked 200 Times in 139 Posts	List updated with sold items, bump on everything else

14th February 2019, 20:57	#5
Holland314 I really should get out more....... MG ZT-T Join Date: May 2014 Location: Haughley Posts: 2,311 Thanks: 481 Thanked 200 Times in 139 Posts	Bump, lots still available. Seats really need to go now as have no room, so £20 for the set, or can be stripped down if anyone after covers, motors etc.

15th February 2019, 22:44	#6
75 tinkerer Regular poster Rover 75 Tourer Join Date: Mar 2013 Location: Darlington Posts: 95 Thanks: 12 Thanked 10 Times in 9 Posts	Don't suppose you have a decent Copperleaf bonnet? Pete

16th February 2019, 19:53	#8
emm-gee-zed-tee Gets stuck in BMW 320 Join Date: Dec 2012 Location: Luton Posts: 512 Thanks: 227 Thanked 60 Times in 50 Posts	You have a PM Tom >