frontpassenger seat(electric) front/back switch.

mileshawk56 · 18th November 2020, 18:09

Can anyone tell me how this slide-type-switch is removed, is it just pull off? If so how? my reason for asking is it can be spun round and it looks if a leg/stud has broken. Its normal action should be fore and aft only movement. I want to get it off in order to repair it. Thankyou for your time. Chris S.

mileshawk56 · 18th November 2020, 18:11

Correction: Forwards/ rearwards travel of the seat cushion part. Chris S.

COLVERT · 18th November 2020, 21:48

HI Chris.---Did you know you can edit your first post very easily ??

picky747 · 19th November 2020, 10:40

A pin on mine had broken, if you pull the switch cover off then get a small panel pin( I used one from a cable clip) and heat it up with a lighter or blow lamp and push it head end into the plastic where the previous pin had snapped off and hold in position till it's cooled enough to hold it's position.A dab of super glue when it had cooled was enough to hold it.

18th November 2020, 18:09	#1
mileshawk56 Posted a thing or two MGZT Join Date: Jul 2015 Location: Berkshire Posts: 1,281 Thanks: 1,738 Thanked 299 Times in 216 Posts	frontpassenger seat(electric) front/back switch. Can anyone tell me how this slide-type-switch is removed, is it just pull off? If so how? my reason for asking is it can be spun round and it looks if a leg/stud has broken. Its normal action should be fore and aft only movement. I want to get it off in order to repair it. Thankyou for your time. Chris S.

18th November 2020, 18:11	#2
mileshawk56 Posted a thing or two MGZT Join Date: Jul 2015 Location: Berkshire Posts: 1,281 Thanks: 1,738 Thanked 299 Times in 216 Posts	Correction: Forwards/ rearwards travel of the seat cushion part. Chris S.

18th November 2020, 21:48	#3
COLVERT This is my second home R75 Saloon. Join Date: Feb 2009 Location: France/or Devon. Posts: 14,003 Thanks: 3,851 Thanked 2,167 Times in 1,816 Posts	HI Chris.---Did you know you can edit your first post very easily ??

19th November 2020, 10:40	#4
picky747 Gets stuck in ROVER Join Date: Sep 2008 Location: Vera Posts: 746 Thanks: 56 Thanked 111 Times in 85 Posts	A pin on mine had broken, if you pull the switch cover off then get a small panel pin( I used one from a cable clip) and heat it up with a lighter or blow lamp and push it head end into the plastic where the previous pin had snapped off and hold in position till it's cooled enough to hold it's position.A dab of super glue when it had cooled was enough to hold it.