|
||
|
||
|
![]() |
#1 |
Loves to post
Rover 75 Tourer Join Date: Dec 2007
Location: Ammanford
Posts: 485
Thanks: 248
Thanked 29 Times in 24 Posts
|
![]() hi to all
can anyone tell me what the torque settings should be for the pressure plate bolts in the haynes manual it says 115nm but that seams excessive to me for such a small bolt the flywheel bolts are much bigger and the torque is 110 nm david |
![]() |
![]() |
![]() |
#2 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
![]() Not sure what you are looking at in Haynes but page 6*1 in mine says 25 Nm for the pressure plate retaining bolts.
|
![]() |
![]() |
![]() |
#3 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,549
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
![]() Yep RAVE says the same Jon. Torqued mine up to 25Nm when I did the clutch a few weeks ago and it hasn't fallen off yet.
![]() |
![]() |
![]() |
![]() |
|
|