tourer rear seat

david2000 · 19th June 2021, 19:09

hi to all
hear are photos of the rear seat mounting can anyone tell me how to remove
https://www.the75andztclub.co.uk/for...mg&imgid=29273

https://www.the75andztclub.co.uk/for...mg&imgid=29274

david

GaryGee · 19th June 2021, 19:12

Don’t think you’ve copied all the pic link mate

david2000 · 19th June 2021, 20:32

hi to all
try again i have changed the links
david

trikey · 19th June 2021, 20:42

There is a bracket thats easier accessed from the boot! Its between the seats where they split, held in with 2 torx fasteners, this has to be removed first.

Then you can gently lever the brass coloured rings (in your pictures) towards the seat and the locating pegs can then be pulled out.

david2000 · 19th June 2021, 21:40

hi to all
i have removed the torx bolts but i can not see any pins do you have a photo
david

trikey · 20th June 2021, 09:03

Look downwards where the locating pegs of the seat sit in the shell of the car, the rings are fitted around the pegs and move when levered with a screwdriver.

david2000 · 20th June 2021, 18:57

hi to all
how i did it i dont know but i got one side loose i cant see any pin/clip but there is a spring
if i unable to get it free i will take a cutting disk to it
david

david2000 · 20th June 2021, 19:34

hi to all
i have now managed to get the other side free using a long screwdriver push the spring in as far as possible then using another screwdriver push the brass bush towards the seat it should move free of the mounting and you should now be able to lift the seat
david

19th June 2021, 19:09	#1
david2000 Loves to post Rover 75 Tourer Join Date: Dec 2007 Location: Ammanford Posts: 485 Thanks: 248 Thanked 29 Times in 24 Posts	tourer rear seat hi to all hear are photos of the rear seat mounting can anyone tell me how to remove https://www.the75andztclub.co.uk/for...mg&imgid=29273 https://www.the75andztclub.co.uk/for...mg&imgid=29274 david Last edited by david2000; 19th June 2021 at 20:31..

19th June 2021, 19:12	#2
GaryGee Avid contributor MG ZT-T Join Date: Dec 2020 Location: Crewe Posts: 102 Thanks: 9 Thanked 47 Times in 36 Posts	Don’t think you’ve copied all the pic link mate Last edited by GaryGee; 19th June 2021 at 20:28..

19th June 2021, 20:42	#4
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,764 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	There is a bracket thats easier accessed from the boot! Its between the seats where they split, held in with 2 torx fasteners, this has to be removed first. Then you can gently lever the brass coloured rings (in your pictures) towards the seat and the locating pegs can then be pulled out. __________________ Lest we forget..

20th June 2021, 09:03	#6
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,764 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	tourer rear seat Look downwards where the locating pegs of the seat sit in the shell of the car, the rings are fitted around the pegs and move when levered with a screwdriver. __________________ Lest we forget..

20th June 2021, 18:57	#7
david2000 Loves to post Rover 75 Tourer Join Date: Dec 2007 Location: Ammanford Posts: 485 Thanks: 248 Thanked 29 Times in 24 Posts	hi to all how i did it i dont know but i got one side loose i cant see any pin/clip but there is a spring if i unable to get it free i will take a cutting disk to it david Last edited by david2000; 20th June 2021 at 19:02..

19th June 2021, 20:32	#3
david2000 Loves to post Rover 75 Tourer Join Date: Dec 2007 Location: Ammanford Posts: 485 Thanks: 248 Thanked 29 Times in 24 Posts	hi to all try again i have changed the links david

19th June 2021, 21:40	#5
david2000 Loves to post Rover 75 Tourer Join Date: Dec 2007 Location: Ammanford Posts: 485 Thanks: 248 Thanked 29 Times in 24 Posts	hi to all i have removed the torx bolts but i can not see any pins do you have a photo david

20th June 2021, 19:34	#8
david2000 Loves to post Rover 75 Tourer Join Date: Dec 2007 Location: Ammanford Posts: 485 Thanks: 248 Thanked 29 Times in 24 Posts	hi to all i have now managed to get the other side free using a long screwdriver push the spring in as far as possible then using another screwdriver push the brass bush towards the seat it should move free of the mounting and you should now be able to lift the seat david