|
||
|
10th July 2020, 13:35 | #1 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Oxygen sensor removal
What's the best way of getting the two oxygen sensors off the cat?
The multiplugs are fairly tricky to get to and I can't see how they release from the connectors. The threaded ends on the cat look fairly cooked in and I don't want to put too much force on them in case the metal starts to bend. Advice please. https://rimmerbros.com/Item--i-MHK100728 NB. I need the cat off so I can drop the front subframe. TIA |
10th July 2020, 15:38 | #2 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Solved using a 22mm open ended. And there's just enough length of cable to allow them to be unscrewed without busting a wire.
|
10th July 2020, 17:07 | #3 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,912
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
I use one of these https://www.ebay.co.uk/itm/SEALEY-TO...gAAOSwCk9bUG6x
|
10th July 2020, 18:38 | #4 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
I nearly bought one of those earlier but couldn't be bothered to wait for delivery. The open ended did it relatively easily. Shame I didn't spot the 3rd sensor though - had to bolt the cat back just to undo the darned thing.
|
|
|