|
||
|
20th August 2009, 00:47 | #1 |
Newbie
Rover 75 Saloon Join Date: Feb 2009
Location: Glasgow
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Clutch gone on 75 CDT-pedal on floor
Can anyone recommend a garage in the Glasgow area to look at the clutch- I've looked at various posts on the site and I don't think I'd be able to even tackle bleeding the clutch myself.The breakdown guy thinks it's probably the dreaded master cylinder which according to receipts was replaced Sept '07 along with the clutch.I'd be grateful for any help!Apologies if I've posted in the wrong place as this is my first post!
|
20th August 2009, 01:45 | #2 |
This is my second home
MG6 TL Join Date: Nov 2006
Location: Tarn
Posts: 5,269
Thanks: 2
Thanked 46 Times in 37 Posts
|
Google XPart or Good Garage Scheme.
Wave goodbye to the best part of a grand for the work too.
__________________
http://www.wcgsig.com/115562.gif |
20th August 2009, 22:18 | #3 |
Regular poster
rover 75 tourer Join Date: Feb 2007
Location: stoke on trent
Posts: 34
Thanks: 4
Thanked 6 Times in 5 Posts
|
fixed my clutch for less than 20 quid
i had same problem managed to fix with engine stop leak mixed with dot3 mixed at 4-1 took a few weeks to work into seals but have had no more signs of leak at master or slave also had to clean sliping friction plate with brake cleaner been ok for several weeks now
Last edited by carlos; 20th August 2009 at 22:23.. |
21st August 2009, 13:26 | #4 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
|
25th August 2009, 03:33 | #5 |
Newbie
Rover 75 Saloon Join Date: Feb 2009
Location: Glasgow
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Clutch pedal on floor
Thanks to all for suggestions.Sorry for the late reply-was away for the weekend( borrowed car).I have put the car into a garage near Hogganfield Loch(Glasgow area) and the mech impressed me with his knowledge of 75.He'going to bleed it 1st but thinks it's probably the slave as this wasn't replaced when the rest of the clutch(inc. master) was done in Sept '07.Cheers again for your help-great site!
|
|
|