|
|
|
|
|
|
||
|
|
||
21st April 2023, 18:36
|
#1 |
|
Loves to post
Rover 75 Saloon Join Date: Apr 2022
Location: Bolton
Posts: 318
Thanks: 180
Thanked 42 Times in 34 Posts
|
Connecting CD Changer XQE105560 to Harmony
I have a 2000 Classic SE fitted with OEM Harmony Radio Cassette.
I have bought a used CD Changer - part number XQE105560 which is listed as compatible with the existing radio. There is a mini-loom normally required to connect these two components, the infamous VUL100310, however I was wondering... Since the CD changer was supplied with about 500mm of extra cable, which I presume was cut from a VUL100310 - see attached photo for wires which I take to be two twisted pairs for Audio L & R, a red/white/yellow K-Bus, a purple/pink +12v, and a black GRND - if I connect these to the correct pins (of the 10 pins) below the 17 pin connector on the rear of the Harmony - I should have a good working circuit... RAVE shows the C1316 (black) connector on the Harmony - pin out is 1 Audio pair left + 2 Audio pair right + 3 Audio Earth - screened 6 Audio pair left - 7 Audio pair right - All others are unused Problems I forsee: Which is pin 1 - top left or bottom right? - my multi meter should identify the live feed. I cannot see the actual 'pin in' to the back of the plug that connects to the cd changer... SD1too has been helpful with wiring/connector diagrams from RAVE Thank you.
__________________
I am Kevin, the car is my Viking shield-maiden, Lagetha! 2000 Rover 75 1.8 Classic SE in Moonstone Green/Black Leather seats and Sandstone Beige Interior (purchased 10 April 2022) 2002 Rover 25 2.0 IL TurboDiesel - gone but not forgotten, you can follow Deric's adventures on YouTube at Boaty's World and Project Nigel. AllegroMan is restoring Deric now. (Owned 25/10/2022-15/05/2023) 
Last edited by Lagetha; 23rd April 2023 at 19:34.. Reason: Correction |
|
|
|
|
Threaded Mode