|
||
|
|
24th July 2021, 19:15 | #1 |
Loves to post
MG ZT+ 190 Join Date: Apr 2009
Location: Chipping Norton
Posts: 393
Thanks: 6
Thanked 26 Times in 22 Posts
|
T4 Lead diagrams
Hi,
Im in the very long process of putting together a T4 system. I have RDS software, DST0003 data disk, and laptop, and indeed the Interface unit DTC4002A. However , im struggling for the leads, indeed, struggling with the cost of them new. Thanks to the great help on this forum, and the histroic posts, I think its viable to make some up myself. I have found some details on some of the adapters, however, ideally it could be great to have the pin-in/outs for all the adapters and cables. I don't currently have access to original cables to copy unfortunatly. Whilst eventually, if like to make up as many cables as I can, of the different types, to start with I could do with the diagrams for:- DTC0065A (red adapter) DTC4008B (VCSI Extension cable ) Is this just a pin to pin extension? I think this is all I need to be able to talk to my ZT. The next step will be to talk to my VVC Coupe, just need to work out the connectors for that as well (and wait for a software disc to turn up!) I have not been able to find any details on the web for these. Can anyone help me? Thanks Richard Last edited by X10Rich; 24th July 2021 at 19:31.. |
24th July 2021, 20:07 | #2 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,406
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
The connector blocks for the cables are readily available as are the pins to make up your own cables there's a few issues
Firstly there's a spacer from the back of the connector block and the cable gland. These were custom made for the Testbook computers including T4 so are not available. I made some out of alloy tubing and tapped it to accept the connector and cable gland. It needs them both as an adapter fot the connector and cable gland but also gives enough room for the wires to be connected to the plugs. Getting some suitable 12 core for the main lead can be difficult unless you've got a friendly supplier as it's usually sold by the compete drum You are correct the Main lead is pin to pin The various coloured leads are all 4 core which is a little easier to get hold of the only difference between them is that different pin and bridging of pins with various values of resistor is what identifies the lead when it's plugged into the interface. I don't have the pin outs and wiring diagrams to hand unfortunately for the various leads at present as the computer hard drive failed, I've got them on back up somewhere will have to see if I can find them. Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
24th July 2021, 22:27 | #3 |
Loves to post
MG ZT+ 190 Join Date: Apr 2009
Location: Chipping Norton
Posts: 393
Thanks: 6
Thanked 26 Times in 22 Posts
|
Hi Russ, thank you for that, thats really appreciated. Thats really helpful.
That makes sence about the custom covers on the connectors, but I should be able to make something up. I did find some cut to length 12 core cable on ebay, but can't seem to find it now! An alternative I was thinking of was to buy 12 different colours of thinwall cable and then use some braded sleaving. Might not be as robust as the original, but hopefully suitable for my needs. I think the main thing is just knowing how they are wired, I should be able to replicate. |
25th July 2021, 05:20 | #4 |
I really should get out more.......
MG ZT-T, Rover 75 Tourer Join Date: Mar 2011
Location: Olney
Posts: 2,969
Thanks: 245
Thanked 1,088 Times in 657 Posts
|
Here you go....plus a picture of some cables i made for one of my own systems (which will be for sale soon )
Last edited by Phil-T4; 25th July 2021 at 05:27.. |
25th July 2021, 10:39 | #5 |
Loves to post
MG ZT+ 190 Join Date: Apr 2009
Location: Chipping Norton
Posts: 393
Thanks: 6
Thanked 26 Times in 22 Posts
|
Thank you Phil for that, just what im after. perfectly clear. Hopefully my cable set will look as good as yours!
Interesting that on the DTC4007B, that acually, it looks like only 10 core cable is needed. Ideally shielded. |
9th August 2021, 21:11 | #6 |
Loves to post
MG ZT+ 190 Join Date: Apr 2009
Location: Chipping Norton
Posts: 393
Thanks: 6
Thanked 26 Times in 22 Posts
|
Im very grateful for the diagrams so far, and I have managed to find some others on teh forum. I have ordered up all the connectors, pins, wire, etc, and just need to assemble the cables to use with my new DTC4002A
However, im struggling to track down the lead info for the "Blue" DTC0061A cable that I need to talk to some of my other cars. Would anyone be able to provide that for me? Also, if you had DTC0063A, that would complete my set of J1962 Adapter diagrams.. Thank you Richard |
3rd October 2022, 06:07 | #7 | |
Newbie
mg Join Date: Sep 2022
Location: nijmegen
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
t4 cable diagrams
Quote:
or are you selling the cables for a normal price im also willing to buy them regards gordon |
|
3rd October 2022, 06:29 | #8 |
Newbie
mg Join Date: Sep 2022
Location: nijmegen
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
hello phil can you share the other lead diagrams i would pay for it no problem
|
5th October 2022, 19:18 | #9 |
Loves to post
MG ZT+ 190 Join Date: Apr 2009
Location: Chipping Norton
Posts: 393
Thanks: 6
Thanked 26 Times in 22 Posts
|
I started this thread last year. In the end I managed to make diagrams of all the common leads, and made my own up by reverse engineering some geunine leads I borrowed. They work well. Drop me a PM, and I'll try and help you.
What im really struggling with is getting my TIM unit to work for Microcheck Emulation..... |
|
|