Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club General Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 5th January 2019, 15:16   #21
Mattyboy
Regular poster
 
Rover 75 saloon / Rover 75 Tourer / MG ZT-T+ (180)

Join Date: Sep 2018
Location: Lincoln
Posts: 78
Thanks: 16
Thanked 11 Times in 5 Posts
Default Colgate toothpaste

I just used the old wives tale of Colgate scrubbed in with a toothbrush.

Did yellow a bit the next day but still looks better than it did.

https://ibb.co/fHQ19RD
Mattyboy is offline   Reply With Quote
Old 5th January 2019, 16:18   #22
mgzrjake
Loves to post
 
mgzrjake's Avatar
 
MG ZTT 135+ diesel, MGZS 180 saloon MK2

Join Date: Mar 2016
Location: stockport
Posts: 434
Thanks: 137
Thanked 72 Times in 53 Posts
Default Re head lamps

Ok, this is without doubt the only way. You must have a DA or obital sander. Start with 500’s then 800’s on to 1200’s to 1500’s then finish with 2000’s. then fine polish with 3000’s and G3. I do 5 sets a day at work for mot purpose’s on old cars and charge £30 a set and believe me the customers are over the moon they think they have new units.

Jt
mgzrjake is offline   Reply With Quote
Old 5th January 2019, 18:46   #23
Brunty
Loves to post
 
Rover 75 Saloon

Join Date: Mar 2017
Location: Newtown
Posts: 414
Thanks: 273
Thanked 95 Times in 65 Posts
Default

Delivery of headlight restore us came today, did the lights on Copperleaf and amazed at the difference, 16 year old cloudy lights look like new! Ok it may only last a few months, but may last longer, time will tell. But I by mistake managed to order 6 sets, at a cost of £60.39 delivered. This will do both my Rover 75's and grandsons "classic" Mini 1 twice. The way I look at it is just another cleaner the same as alloy wheel cleaner, snow foam, polish etc. Ongoing cleaning product that works.
Brunty is offline   Reply With Quote
Old 5th January 2019, 21:23   #24
SideValve
Gets stuck in
 
SideValve's Avatar
 
Rover 75 Saloon

Join Date: Apr 2012
Location: Oxford
Posts: 767
Thanks: 141
Thanked 204 Times in 141 Posts
Default

Two years ago I tried the T-Cut product. Very happy with the result then and still looking good now.
Took a fair amount of elbow grease but the car gets used to commute every day and isn't garaged so pleased with how well its lasted - especially for the price.
Pack was enough to do the better half's car's lights as well and still have enough left for another go when next needed.
__________________
The Story So Far: Austin A35, Morris Oxford, Triumph Herald, Mini 850, Mini 1000, Austin Allegro, MG Midget, MGB GT, Rover SD1 2600, Austin Maxi, Rover 200, Rover 825, Rover 800, Bedford TK, Range Rover 3.9 efi, Rover 400, Rover 100, MGF, Rover 25, Rover 75 1.8, Rover 75 Connoisseur SE 2.0 V6, MGF 1.8i, Rover 75 Connoisseur 2.0 V6 Auto, Morris Eight Series E, Morris Minor 1275.
SideValve is offline   Reply With Quote
Old 5th January 2019, 23:36   #25
HarryM1BYT
This is my second home
 
HarryM1BYT's Avatar
 
75 Contemporary SE Mk II 2004 Man. Sal. CDTi 135ps, FBH on red diesel, WinCE6 DD

Join Date: May 2010
Location: Leeds
Posts: 17,273
Thanks: 2,160
Thanked 2,061 Times in 1,586 Posts
Default

The polishing up is easy enough, the issue is the longevity once it has been done - once done, they soon return to the dullness in weeks. Obviously all the effort removes what ever coating was originally applied to protect the lens and that is what needs to be addressed. The polished up surface must be very delicate.



Many months ago, I gave my battered old favourite watch's dull lens (crystal) a polish up, as I have done a couple or more times my headlight. I then gave it a quick spray with the 'clear coat' as used on car paint. It seems to have survived well on the watch and I wonder if it might help with the headlight lens issue?
__________________
Harry

How To's and items I offer for free, or just to cover the cost of my expenses...

http://www.the75andztclub.co.uk/foru...40#post1764540

Fix a poor handbrake; DIY ABS diagnostic unit; Loan of the spanner needed to change the CDT belts; free OBD diagnostics +MAF; Correct Bosch MAF cheap; DVB-T install in an ex-hi-line system; DD install with a HK amp; FBH servicing.

I've taken a vow of poverty. To annoy me, send money.
HarryM1BYT is offline   Reply With Quote
Old 21st August 2022, 15:56   #26
SideValve
Gets stuck in
 
SideValve's Avatar
 
Rover 75 Saloon

Join Date: Apr 2012
Location: Oxford
Posts: 767
Thanks: 141
Thanked 204 Times in 141 Posts
Default

Quote:
Originally Posted by SideValve View Post
Two years ago I tried the T-Cut product. Very happy with the result then and still looking good now.
Took a fair amount of elbow grease but the car gets used to commute every day and isn't garaged so pleased with how well its lasted - especially for the price.
Pack was enough to do the better half's car's lights as well and still have enough left for another go when next needed.
OK so one cut in 2017, I did them again in 2020.

Just done them again still using the same t-Cut pack

Maybe not the most long lasting solution but pretty cost efficient :¬)
__________________
The Story So Far: Austin A35, Morris Oxford, Triumph Herald, Mini 850, Mini 1000, Austin Allegro, MG Midget, MGB GT, Rover SD1 2600, Austin Maxi, Rover 200, Rover 825, Rover 800, Bedford TK, Range Rover 3.9 efi, Rover 400, Rover 100, MGF, Rover 25, Rover 75 1.8, Rover 75 Connoisseur SE 2.0 V6, MGF 1.8i, Rover 75 Connoisseur 2.0 V6 Auto, Morris Eight Series E, Morris Minor 1275.

Last edited by SideValve; 21st August 2022 at 16:19.. Reason: forgotten Id done them in 2020
SideValve is offline   Reply With Quote
Old 22nd August 2022, 09:23   #27
hogweed
I really should get out more.......
 
Vauxhall Insignia CDTi; MG TF 135

Join Date: Jan 2010
Location: Norn Iron
Posts: 2,942
Thanks: 942
Thanked 378 Times in 297 Posts
Default

Quote:
Originally Posted by HarryM1BYT View Post
The polishing up is easy enough, the issue is the longevity once it has been done - once done, they soon return to the dullness in weeks. Obviously all the effort removes what ever coating was originally applied to protect the lens and that is what needs to be addressed. The polished up surface must be very delicate.

Yes, that's the problem. About a year and a half ago, I spent a day doing my (very bad) lights with this, and they looked pretty good.


This kit includes a spray can of lacquer, which is supposed to preserve the finish you've spent so much time and effort creating. I gave it three coats, from memory, and it worked well... but I notice now a faint dullness starting to reappear
__________________
Past cars: MGB GT; Escort 1300 Sport; Vauxhall VX4/90; Marina Coupe TC; Celica ST (1972); Montego Turbo; Astra GTE 16V; Astra GSI 16V; Golf GTI 16V (Mk II); Sierra XR4x4 Estate; BMW 325i (E30); BMW M3 3.0; BMW M3 3.2 Evo. Left some of the more embarrassing ones out. And about 30 motorbikes.
hogweed is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 14:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd