|
||
|
16th September 2021, 08:01 | #1 |
Loves to post
MG ZTT 135+ diesel, MGZS 180 saloon MK2 Join Date: Mar 2016
Location: stockport
Posts: 436
Thanks: 137
Thanked 72 Times in 53 Posts
|
Ztt diesel exhaust replacement
Hi all looking at replacing my exhaust Mk2 Ztt diesel. The one that is fitted to mine falls short of the rear bumper so you can’t see the twin pipes pointing out/down I think someone one has fitted a saloon one ? Are there any differences between MK1 or Mk2 estate models. Can anyone recommend a replacement if they have had this problem.
Thank you Jt. |
16th September 2021, 12:44 | #2 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
It's quite often a problem with tourers, most of the aftermarket ones fit saloons and don't have the right outlets for a ZT.
Easiest way is to alter one with longer straight outlets. I had a similar thing recently when I replaced the silencer on the Volvo, I could only get hold of a box with a downturned outlet( unless I got an original at £450. Ouch!) and no chrome trim so chopped the outlet off my old one that wasn't corroded and welded it on to the new box. Fits better than it's ever done, with the pipe central in the bumper cut out now Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
16th September 2021, 16:10 | #3 |
Loves to post
MG ZT Join Date: Dec 2018
Location: holt
Posts: 296
Thanks: 219
Thanked 112 Times in 49 Posts
|
I got one fitted at wilco a few weeks ago at wilco and it looked awful.
They have the same part number for a ZT and a 75 but Zt ones are a few inches longer I cut the tail pipes back and fitted some turneddown tailpipe trims from amazon |
16th September 2021, 18:20 | #4 |
Loves to post
MG ZTT 135+ diesel, MGZS 180 saloon MK2 Join Date: Mar 2016
Location: stockport
Posts: 436
Thanks: 137
Thanked 72 Times in 53 Posts
|
That’s what I’m now thinking they only do them for a 75 as their hidden on both MK1 and Mk2 no cut out in the rear bumper of either very annoying
|
17th September 2021, 10:08 | #5 | |
Avid contributor
mg zt-t Join Date: Oct 2007
Location: Staines
Posts: 192
Thanks: 1
Thanked 1 Time in 1 Post
|
Quote:
It's been on my car since 2009 and hasn't needed touching. |
|
|
|