|
||
|
30th November 2016, 10:13 | #11 |
Loves to post
mgztt190/bmw e30 325i tourer Join Date: Sep 2015
Location: Ballyclare
Posts: 316
Thanks: 50
Thanked 50 Times in 41 Posts
|
Fuel tank strap.
Got one off a breaker last night that was on 4 axle stands,what a night mare that was, getting exhaust dropped was a pig of a job. Had a look under car though only a couple of 10mm bolts that hold the black cross brackets under the exhaust,every one must have been put in with locite an hour later got 2 off and ended up using angle grinder on the last one, then every exhaust bolts was rounded off, so had to go to manifold 3 15mm came off with a drop of wd40 no problem last one just wouldn't budge breaker bar out and snapped the last one broken stud in manifold, all the exhaust mounting where rock hard so a another hour later exhaust off loosened the fuel tank bracket bolts, oh joy wont come pass handbrake cables so out came angle grinder again damned after near 3 hours was i taking interior apart to do it right. So my advice is pay someone else to do it.
Sent from my iPhone using Tapatalk
__________________
My MGZTT This vehicle was the 2,432nd ZT-T to run off the production line, out of 8,249 This vehicle was the 847th ZT-T 190 + to be made out of 1,756 This vehicle was the 100th ZT-T in Starlight Silver (code: MBB) to be made out of 1,134 Starlight Silver ZT-Ts Last edited by e30325itourer; 30th November 2016 at 10:27.. |
|
|