|
||
|
23rd June 2019, 20:25 | #61 |
Avid contributor
MG ZT Join Date: Sep 2014
Location: Westhoughton Bolton
Posts: 233
Thanks: 153
Thanked 16 Times in 14 Posts
|
I followed official guideline to bleed it by filling the tank with it raised and then undoing the bleed screw and removing the thin pipe from the radiator until there was a small stream of water from the bleed hole and from the radiator if it makes any difference water doesn't start coming out from the bleed hole and radiator until there is about 6.5 litre in whether that is normal.
Last edited by racing green rover; 23rd June 2019 at 20:35.. |
13th July 2019, 15:46 | #62 |
Avid contributor
MG ZT Join Date: Sep 2014
Location: Westhoughton Bolton
Posts: 233
Thanks: 153
Thanked 16 Times in 14 Posts
|
I have bypassed the oil cooler the water didn't rise as quick in the expansion tank I will update tomorrow when it has completely cooled down
Thanks everyone who've commented Update. It seems it was the oil cooler the water doesn't back up no more in the tank so even after I flushed it they still must have been a blockage in the cooler what won't shift Thanks everyone for your help Last edited by racing green rover; 14th July 2019 at 10:34.. |
15th July 2019, 17:11 | #63 |
Avid contributor
MG ZT Join Date: Sep 2014
Location: Westhoughton Bolton
Posts: 233
Thanks: 153
Thanked 16 Times in 14 Posts
|
Though I'd post again incase anyone what's contributed hasn't seen the outcome it was the oil cooler that was blocked even though I flushed it, I bypassed it with a few pieces of copper piping fitted with compression connectors the result coolant doesn't back up in the tank no more the bleed pipes seem to be hotter too
|
15th July 2019, 20:24 | #64 | |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,381
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Quote:
I hope that you will complete the job by investing in a replacement oil cooler. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
|
15th July 2019, 20:43 | #65 |
Avid contributor
MG ZT Join Date: Sep 2014
Location: Westhoughton Bolton
Posts: 233
Thanks: 153
Thanked 16 Times in 14 Posts
|
Iv spoke to a member on here who has one just waiting for him to test it and get back to me otherwise i will have to bite the bullet and get a new one. it's going to get a few more flushes as the k seal seems to be never ending even though I must have flushed it about 15 times every time I flush it the water goes clear with no k seal particules in it then when the engine has been run and I check the coolant after there is k seal particules in the water
|
16th July 2019, 07:11 | #66 |
This is my second home
Rover 75 Saloon CDTi Join Date: Oct 2015
Location: Belvedere
Posts: 4,076
Thanks: 108
Thanked 1,089 Times in 774 Posts
|
Thank you for keeping us up to date on this problem.
Nothing more annoying than than a thread that just ends with no conclusion. |
|
|